Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

Before updating the BIOS, please suspend BitLocker encryption. If it is not enabled on your system, you can skip this step. Learn more

Dell Latitude 5289 system BIOS

Restart required
This package provides the Dell System BIOS update and is supported on Dell Latitude 5289 for Windows and DOS Operating Systems.

Get the latest driver

Please enter your product details to view the latest driver information for your system.

This driver is not compatible

This driver is up-to-date

The driver information is up-to-date. To view all drivers for your Latitude 5289 2-in-1, go to Drivers & Downloads.

Fixes & Enhancements

Fixes:
- Fixed BIOS recovery via USB thumb drive show firmware update fail issue.
- Fixed Hard Disk Drive (HDD) password bypassed after shutting down system.
- Fixed keyboard trigger abnormal when press multiple keys at the same time.
- Updated Intel ME Firmware to address security advisories INTEL-SA-00112 (CVE-2018-3628 CVE-2018-3629 CVE-2018-3632 ) & INTEL-SA-00118(CVE-2018-3627).
- Updated CPU microcode to address security advisory Intel Security Advisory INTEL-SA-00115 (CVE-2018-3639 & CVE-2018-3640).

Enhancements:
- Enhanced AutoRecovery feature.
- Updated Enhanced Pre-Boot System Assessment (ePSA) firmware.
- Updated UEFI compliance level to 2.5.
- Resolved issue with Virtual Keyboard (On-Screen) input in PBE. Virtual Keyboard input lagging or not recognized.

Version

Version 1.13.0, 1.13.0

Category

BIOS

Release date

03 Jul 2018

Last Updated

03 Jul 2018

Importance

Available formats

File Format: Windows/DOS
File Name: Latitude_5289_1.13.0.exe
Download Type: HTTP
File Size: 13.23 MB
Format Description:
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
4f32d32006a13adb1e0f221fba18bdeb
SHA1:
be714bf39fa3e7b9cb4c587aa34e71aa8b631447
SHA-256:
0efac22c41430da3072e1a38eeddf71c36e70c4e9bac199f31e2bbc24d9b0f83
File Format: Rel-Notes-Text
File Name: Latitude_5289_1.13.0.txt
Download Type: HTTP
File Size: 9.47 KB
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
eb7800155d328f0fe9335700badd94ab
SHA1:
059b32b569a303f3d11dba8c1b89f3c3564766ac
SHA-256:
37dccfbabcef793e7c662d7bee03f6d0715f35a8b6e507e7f2ceba806f359518

By downloading, you accept the terms of the Dell Software License Agreement.

Dell Latitude 12 5000 Series 2-in-1/ Latitude 13 7000 Series 2-in-1
[Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

[Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.

[Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users,Load Legacy Option ROM Disabled)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option"
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot List Option"
9. Change "Legacy" to "UEFI" Boot Option.
10. Load Legacy Option ROM->Enabled
11. Go to "Exit" > Exit Save Changes and reboot system
Important:
- Not allowed to downgrade BIOS EXE / Recovery (RCV) to the version before 1.1.5.

Drivers help and tutorials