Driver Details

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

Dell Precision 7510/7710 System BIOS

This package provides the Dell System BIOS update and is supported on Dell Precision 7510/7710 for Windows and DOS Operating Systems.

Fixes & Enhancements

Fixes:
- Fixed system restart issue when both Device Guard and Credential Guard enabled in Win10 enterprise.
- Fixed system only can switch display to external monitor one time by lid close in the Bios Setup.
- Fixed system become reboot from hibernation resume after loading Bios default.

Enhancements:
- Updated Intel Management Engine Firmware.
- Updated Embedded Controller Engine Firmware.
- Updated TI Power Delivery firmware.
- Updated Intel Video BIOS and Graphics Output Protocol driver.
- Updated Intel Rapid Storage Technology RAID Driver.

Version

Version 1.9.5, 1.9.5

Category

BIOS

Release date

28 Dec 2016

Last Updated

28 Dec 2016

Importance

Available formats

File Format:Windows/DOS
File Name:Precision_7x10_1.9.5.exe
Download Type:HTTP
File Size: 9 MB
Format Description:This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
8be1865d810519698b0b902ccf47b279
SHA1:
e322484c7ce9bfd4dd8b79b26fa7543b4e4a02e6
SHA-256:
c75f57dbe7feb714ef7bfadc57835cc62fa8301347460d132310eec17d0bc8f4

By downloading, you accept the terms of the Dell Software License Agreement.

Applies to
Precision 7510 system BIOS
Precision 7710 system BIOS
Installation instructions
BIOS Update Executable for Windows/DOS

Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Click "Apply","Exit" to save changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS system will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.

Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLockerencryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Important Information
Important:
- Not suggested/allowed to downgrade BIOS to the version before 1.6.6
x
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).