Driver Details

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

Dell Latitude 3490/3590 KBL System BIOS

This package provides the BIOS update for Dell Latitude 3490/3590 running the following Operating Systems: Windows and DOS.

Fixes & Enhancements

Fixes:
- Update to the latest CPU microcode to address CVE-2017-5715 and associated Intel Reboot issue.

Enhancements:
- N/A

Version

Version 1.3.0, 1.3.0

Category

BIOS

Release date

18 Feb 2018

Last Updated

18 Feb 2018

Importance

Available formats

File Format:Windows/DOS
File Name:Latitude3490_3590_1.3.0.exe
Download Type:HTTP
File Size: 7 MB
Format Description:This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
601802b9a1ec5cf460acd9e9d4f30b8d
SHA1:
a15351521bdbf88a4f277a5ca38e7898fcddc484
SHA-256:
0609f2229bab1bf2f3872cae67e956ed59d427a8893657bf7d05c31db0cc4593

By downloading, you accept the terms of the Dell Software License Agreement.

Applies to
Latitude 3490/3590
Installation instructions
Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

[Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.

[Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users,Load Legacy Option ROM Disabled)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option"
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot List Option"
9. Change "Legacy" to "UEFI" Boot Option.
10. Load Legacy Option ROM->Enabled
11. Go to "Exit" > Exit Save Changes and reboot system
x
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.