Driver Details

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

Dell OptiPlex 9020M System BIOS

This package provides the Dell System BIOS update and is supported on Dell OptiPlex 9020M for Windows and DOS Operating Systems.

Fixes & Enhancements

Fixes
- Update to the latest CPU microcode to address CVE-2017-5715 and associated Intel Reboot issue.

Enhancements
- Not Applicable.

Version

Version A16, A16

Category

BIOS

Release date

27 Feb 2018

Last Updated

27 Feb 2018

Importance

Available formats

File Format:Windows/DOS
File Name:9020MA16.exe
Download Type:HTTP
File Size: 9 MB
Format Description:This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
6bf30c881d156ae96b304dcb04dfc8f9
SHA1:
3c9d8e5c71e2b3dcb37eaccf261fa451fa3fe668
SHA-256:
6efe2eb481b17b30b790b1fa36d59c184c660237a9e9a438ff6b89e613ceecac

By downloading, you accept the terms of the Dell Software License Agreement.

Applies to
Dell OptiPlex 9020M
Installation instructions
BIOS Update Executable for Windows/DOS

Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users).
1. Copy the downloaded file to a bootable DOS USB key and rename the file name to less than or equal to 8 characters (8.3 format), like 9020MA14.exe.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key and rename the file name to less than or equal to 8 characters (8.3 format), like 9020MA14.exe.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Click "Apply","Exit" to save changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS system will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.

--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
x
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.