Driver Details

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

Dell Edge Gateway 3000 Series System BIOS

This package provides the Dell System BIOS update and is supported on Dell Edge Gateway 3000 Series for Ubuntu and Windows 10 IoT Enterprise.

Fixes & Enhancements

Fixes
- Update to the latest CPU microcode to address CVE-2017-5715.
- Adjusted the monitor resolution for some KVM systems to show Dell logo normally.
Enhancements
- Updated Watch Dog Timer behavior.

Version

Version 1.0.6, 1.0.6

Category

BIOS

Release date

01 Feb 2018

Last Updated

29 Mar 2019

Importance

Available formats

File Format:Windows/DOS
File Name:Edge_Gateway3000Series_1.0.6.exe
Download Type:HTTP
File Size: 4 MB
Format Description:This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
d54fc1a34b57a363b9b4c195d0eab6cf
SHA1:
8322c890c9cc586ce549452dc469b538a3933b18
SHA-256:
af28ca2d67e01a3367f210d13e9675e75f4441013798de281866fec1b10d0c12

By downloading, you accept the terms of the Dell Software License Agreement.

Applies to
Dell Edge Gateway 5000 System BIOS
Installation instructions
BIOS Update from the BIOS Boot Menu/USB Invocation script

Download
1. Click Download File to download the file.
2. When the File Download Window appears, click Save to save the file to your hard drive.

Perform the BIOS update from the BIOS Boot Menu, independent of the installed operating system
1. Copy the downloaded file to a USB flash device. The flash device does not need to be bootable.
2. Insert the USB flash device into any USB port.
3. Power on the system.
4. At the Dell logo screen, press F12 to access the one-time boot menu.
5. Select "BIOS Flash Update" in the "Other Options" section.
6. Click on the "..." button to browse the USB flash device to locate the downloaded file.
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
9. Click "Begin Flash Update"
10. Review the warning message and click "Yes" to proceed with the update.
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
12. The system will restart once again when the Flash update is complete.

--------------------------------------------------------------------------------
Note: If BitLocker is enabled on your system, please suspend BitLocker encryption before updating the system BIOS.

Perform the BIOS update by USB Invocation script (especially for headless configurations)
The Edge Gateway 3000 Series come in headless configurations-that is, configurations without any video output. Certain basic system administration tasks traditionally accomplished by the BIOS Setup program are not possible without video. Therefore, in order to provide the ability to perform these system administration tasks, Edge Gateways contain a facility for running a script file during the boot up from a USB flash drive containing a limited set of BIOS commands.
For more information about USB Invocation script, see Edge Gateway USB script utility User's Guide.
x
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.