Driver Details

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

Dell Precision Workstation T7610 System BIOS

This package provides the Dell System BIOS update and is supported on Dell Precision T7610 for Windows and DOS Operating Systems.

Fixes & Enhancements

Fixes
- Addressed Windows 10 Device Guard cannot reboot.
- Addressed Enternet adapter cannot be disabled.
- Addressed McAfee NVMe issue.
- Addressed BIOS update under DOS/OS.

Enhancements
- Updated MCU to MED306E4_00000428.
- Updated SecureMOR for Credential Guard.
- Updated suspend/resume protections.

Version

Version A12, A12

Category

BIOS

Release date

22 Sep 2016

Last Updated

22 Sep 2016

Importance

Available formats

File Format:Windows/DOS
File Name:T7610A12.exe
Download Type:HTTP
File Size: 8 MB
Format Description:This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
8c97b098c6cc39778e663c86330a9816
SHA1:
0dccff74cca118df895fe5c58f008a8fe6fb0f45
SHA-256:
92565b0bdef638f87a89bc18f563d01529ae807d9d3789854df2703b75678732

By downloading, you accept the terms of the Dell Software License Agreement.

Applies to
Dell Precision T7610
Installation instructions
BIOS Update Executable for Windows/OS independent

Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

Perform the BIOS update from the BIOS Boot Menu, independent of operating system.
1. Copy the downloaded file to a USB flash device. It does not need to be bootable.
2. Insert the USB flash device into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one time boot menu.
5. Select "BIOS Flash Update" in the "Other Options" section.
6. Click on the "..." button to browse the USB flash device to locate the downloaded file.
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
9. Click "Begin Flash Update"
10. Reviewing the Warning message and click "Yes" to proceed with the update.
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
12. The system will restart once again when the Flash update is complete.

--------------------------------------------------------------------------------
Note 1: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it

Reboot will be required
x
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).