Cisco MDS: Zoneset not present
Summary: Zoneset not present.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Seeing "Zone not present" and "Zoneset not present" message through "show zone" and "show zoneset" CLI commands:
Example:
9148# show zone Zone not present 9148# show zoneset Zoneset not present
Cause
The full Zoning Database is out of sync. No zone or zoneset information is populated.
'show zone status"
...
Full Zoning Database :
DB size: 0 bytes
Zonesets:0 Zones:0 Aliases: 0
Active Zoning Database :
DB size: 252 bytes
Name: zoneset_vsan10 Zonesets:1 Zones:100
Resolution
Performed zone copy
Affected Products
Connectrix MDS-9148SProducts
Connectrix MDS-9148SArticle Properties
Article Number: 000055606
Article Type: Solution
Last Modified: 15 يناير 2026
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.