Data Domain: How To Modify the Space Usage Alert Threshold

Summary: This article provides steps to set a warning for space utilization on Data Domain systems.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

By default Data Domain posts an alert when space utilization reaches 90%. However, this can be changed while utilization is between 50% and 90% depending on individual requirements.
 
Set the warning level for space usage with the following commands. The warning threshold can be between 50-90%. For example, to set the warning at 75% space usage:
sysadmin@datadomain# filesys option set warning-space-usage 75
sysadmin@datadomain# filesys option show warning-space-usage
warning-space-usage percentage is: 75
 
Set the critical space threshold with the following commands. The critical threshold can be between 75%-98%. For example, to set critical space usage at 85%:
sysadmin@datadomain# filesys option set critical-space-usage 85
sysadmin@datadomain# filesys option show critical-space-usage
critical-space-usage percentage is: 85
 
The critical-space-usage percentage should be set higher than the warning-space-usage percentage.
 
If assistance is needed with this article, contact your contracted support provider and open a service request.

Additional Information

Note: The Data Domain may still post a critical space alert at 90% even if the threshold is set higher. This is by design - see this article for more information.

Affected Products

Data Domain

Products

Data Domain, DD OS 6.2, DD OS, DD OS 6.0, DD OS 6.1
Article Properties
Article Number: 000013622
Article Type: How To
Last Modified: 20 آذار 2026
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.