Data Domain: Determining the File System Cleaning Schedule and Setting the Schedule

Summary: Determining the file system cleaning schedule and setting the schedule

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

PURPOSE:

Determining the file system cleaning schedule and setting the schedule.

APPLIES TO: 

  • All Data Domain systems

ISSUE:

Cleaning is not running when expected because the schedule is set wrong.

SOLUTION:

  1. Connect to the DDOS command line through SSH or the serial console.
  2. Verify the status of cleaning: # filesys clean status
  3. Verify the current cleaning schedule: # filesys clean show schedule
  4. Set the new schedule for cleaning as required. For example, to run cleaning once per week on Tuesday at 0600, use this syntax: # filesys clean set schedule tue "06:00"

Further syntax instructions are in the command reference guide: PowerProtect and Data Domain core documents

  1. Verify that you have set the schedule as required: # filesys clean show schedule
  2. Start a cleaning if necessary: # filesys clean start

Additional Information

View this published video:

Set and Verify file system Cleaning on Dell Data Domain Systems.

Duration: 00:02:31 (hh:mm:ss)
When available, closed caption (subtitles) language settings can be chosen using the CC icon on this video player.

You can also view this video on YouTube (External Link)

Affected Products

Data Domain
Article Properties
Article Number: 000022727
Article Type: How To
Last Modified: 17 حزيران 2026
Version:  8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.