AppSync: AppSync 데이터베이스 복제본을 생성하지 않고 Windows 스케줄러를 통한 자동화된 AppSync 데이터베이스 백업
Summary: AppSync 데이터베이스 복제본을 생성하지 않고 Windows 스케줄러를 통한 자동화된 AppSync 데이터베이스 백업
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Windows 스케줄러를 통한 자동화된 AppSync 데이터베이스 백업은 정상적으로 실행됩니다. AppSync 데이터베이스 복제본은 생성되지 않습니다.
Cause
.
Resolution
해결 방법:
appsyncbackup.bat 파일을 다음과 같이 변경해야 합니다.
4. 동일한 파일 appsync-backup.bat에서 아래 줄을 제거하십시오.
5. cmd에서 관리자로 실행하여 수동으로 백업을 수행하고 스크립트가 작동하는지 확인합니다.
6. 이제 Windows 작업 스케줄러를 사용하여 스크립트를 시작하면 작동합니다.
해결:
이 문제는 4.3.0.0 이후 버전에서 해결되었습니다.
appsyncbackup.bat 파일을 다음과 같이 변경해야 합니다.
1. C:\EMC\AppSync\backup-assistant\appsync-backup.bat 파일을 백업합니다.
2. 메모장 또는 메모장++에서 appsync-backup.bat 파일을 엽니다.
3. 줄 집합 params=%* 뒤에 아래 줄 추가
2. 메모장 또는 메모장++에서 appsync-backup.bat 파일을 엽니다.
3. 줄 집합 params=%* 뒤에 아래 줄 추가
APPSYNC_CST_CONFIG_DIR=%APPSYNC_CST_CONFIG_DIR%
cd %APPSYNC_CST_CONFIG_DIR%
cd .를 설정합니다.
시디..
APPSYNCHOME=%cd%
set BACKUPHOME=%APPSYNCHOME%\\백업 도우미 설정
cd %APPSYNC_CST_CONFIG_DIR%
cd .를 설정합니다.
시디..
APPSYNCHOME=%cd%
set BACKUPHOME=%APPSYNCHOME%\\백업 도우미 설정
4. 동일한 파일 appsync-backup.bat에서 아래 줄을 제거하십시오.
BACKUPHOME=%CD:\=\\%
설정 APPSYNCHOME=%CD:\=\\% 설정
설정 APPSYNCHOME=%CD:\=\\% 설정
5. cmd에서 관리자로 실행하여 수동으로 백업을 수행하고 스크립트가 작동하는지 확인합니다.
6. 이제 Windows 작업 스케줄러를 사용하여 스크립트를 시작하면 작동합니다.
이 문제는 4.3.0.0 이후 버전에서 해결되었습니다.
Products
AppSync, AppSyncArticle Properties
Article Number: 000190603
Article Type: Solution
Last Modified: 11 مايو 2026
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.