NetWorker: OpenSSL version 1.0.2 detected on vProxy appliance
Summary: OpenSSL version 1.0.2 detected on vProxy appliance
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
OpenSSL version 1.0.2 is detected on vProxy appliance, which is an end of life version (EOSL).
EOSL version detected using Flexera tool on vProxy 4.3.0-x (or older).
Cause
OpenSSL 1.0.2p-fips is the default OpenSSL version for SUSE 12SP5.
The OpenSSL package on the vProxy appliance cannot be upgraded outside of vProxy upgrade workflow.
Resolution
This requires the vProxy solution to upgrade its underlying operating system from SUSE 12 SP5 to SUSE 15.
Upgrade the vProxy appliance to the latest release: NVP vProxy: How To Upgrade the NVP vProxy Appliance using nsrvproxy_mgmt
vProxy 4.4.0.x migrated from SLES 12 SP5 to SLES 15 SP4. The 4.4.0.x vProxy releases use OpenSSL 1.1.1l-fips
NOTE: Openssl 1.1.1 will continue to be supported until the End of Life of the SLES 12 and SLES 15 product line including the LTSS phase.
Additional Information
- Overview of OpenSSL versions in SUSE Linux Enterprise Server | https://www.suse.com/support/kb/doc/?id=000019582
- SUSE Product Support Lifecycle | https://www.suse.com/lifecycle/#suse-linux-enterprise-hpc-15
- NVP vProxy: NetWorker vProxy Version Information
Products
NetWorkerArticle Properties
Article Number: 000222085
Article Type: Solution
Last Modified: 21 يوليو 2026
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.