14G:システムの再起動後、iDRACに仮想ディスク情報が断続的に表示されないことがある
Summary: システムの再起動後、Integrated Dell Remote Access Controller (iDRAC)に仮想ディスク情報が断続的に表示されない場合があります。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
情報イベント "RAC0513: There are no virtual disks to be displayed." )が示されてもよい。
Cause
根本的な原因は、タイミングの問題により、システムの再起動中に仮想ディスクのインベントリが完了しないことです。
Resolution
iDRACのリセットを実行すると、この問題は解決されます。
Affected Products
PowerEdge R240, PowerEdge R340, PowerEdge R440, PowerEdge R540, PowerEdge R640, PowerEdge R6415, PowerEdge R740, PowerEdge R740XD, PowerEdge R740XD2, PowerEdge R7415Products
XE Servers, PowerEdge R7425, PowerEdge R840, PowerEdge R940, PowerEdge R940xa, PowerEdge T140, PowerEdge T340, PowerEdge T40, PowerEdge T440, PowerEdge T640Article Properties
Article Number: 000303213
Article Type: Solution
Last Modified: 27 أيار 2025
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.