Dell NativeEdge: Hot Swap Disks while deployment is running
Summary: For an endpoint which is not a part of the High Availability (HA) cluster, performing a hot-swapping of a disk which is not mirrored fails.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
For an endpoint which is not a part of the High Availability (HA) cluster, performing a hot-swapping of a disk which is not mirrored fails. If there are deployments running on the hot-swapped disk, the disk replacement operation fails until the device is rebooted. Also the state of the deployments displayed is stale
Cause
It is working as design.
Resolution
Reboot the device to complete disk replacements and reflect correct status of the deployments.
The enhancement will be in future NativeEdge releases.
Affected Products
NativeEdge SolutionsArticle Properties
Article Number: 000340297
Article Type: Solution
Last Modified: 26 آب 2025
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.