PowerScale 執行狀況檢查 43.0.0 報告過期的 DNOS 錯誤

Summary: HealthCheck 43.0.0 版錯誤地報告有關 PowerScale 後端交換器上 Dell 網路作業系統過期的嚴重警告。已發佈執行狀況檢查 43.1.1 來修正此報告錯誤。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

輸出來自 HealthCheck 43.0.0 是：

Example errors found in logs: DNOS (Dell Networking Operating System) version 
is outdated which can lead to node splits and might lead to a data unavailability situation. 
It is strongly recommended to upgrade DNOS to the latest certified version.

Cause

變更驗證 DNOS 版本的演算法 HealthCheck 報告低於 DNOS 10.5.6.9 的任何版本已過時。

Resolution

HealthCheck 43.1.1 發佈以解決報告錯誤。安裝 HealthCheck 43.1.1 包。

DNOS 10.5.6.9 版是符合 PowerScale 後端交換器資格的最新版本。任何先前的合格版本都沒有問題，可能會造成可能導致節點分割或資料無法使用的情況。

先前合格的版本仍可與所有目前版本的 OneFS 搭配使用。

Previously qualified versions include:

10.5.0.6.C1
10.5.0.6.C2
10.5.0.6.C3

10.5.2.7
10.5.2.9
10.5.2.11
10.5.2.13

Affected Products

PowerScale Switch Z9100

Products

PowerScale Switch S4112F, PowerScale Switch S4148F, PowerScale Switch S5232F, PowerScale Switch Z9264
Article Properties
Article Number: 000469620
Article Type: Solution
Last Modified: 17 حزيران 2026
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.