Dell Unity: Cómo expandir un pool Unity mediante la CLI
Summary: En este artículo, se explica cómo utilizar la CLI de administración empresarial de Unity (UEMCLI) para expandir un pool de almacenamiento de Dell Unity existente mediante la adición de un nuevo grupo de discos. En el ejemplo se muestra el comando pool extend, incluidos los parámetros necesarios, como el ID del pool, el ID del grupo de discos, la cantidad de unidades y el perfil de almacenamiento. El procedimiento se puede utilizar para aumentar la capacidad disponible y, al mismo tiempo, mantener la organización del almacenamiento en niveles deseada y las características de rendimiento del pool. ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
1. Compruebe el estado del pool y obtenga la información de la unidad y del grupo RAID:
uemcli /stor/config/pool -name <pool_name> show -detail
Example:
14:11:25 service@xyz spb:~/user> uemcli /stor/config/pool -name XYZ123 show -detail
1: ID = pool_3
Type = Dynamic
Name = March2025
Description =
Total space = 3815810007040 (3.4T)
Current allocation = 20392058880 (18.9G)
Preallocated = 11551760384 (10.7G)
Remaining space = 3783866187776 (3.4T)
Subscription = 1182995120128 (1.0T)
Flash percent = 39%
Subscription percent = 31%
Alert threshold = 70%
Drives = 6 x 600.0G SAS; 6 x 400.0G SAS Flash 3
Number of drives = 12
RAID level = 5
Stripe length = 5
Rebalancing = no
Rebalancing progress =
Health state = Degraded/Warning (10)
Health details = "This storage pool exceeds the critical capacity threshold. Thin-provisioned resources may suffer data loss or become unavailable when the pool reaches full capacity. Snapshots may become invalid and replication sessions may stop synchronizing for storage resources provisioned in this pool. To allocate more storage space, add more disks to your system. (https://10.120.162.226/help/webhelp/en_US/index.html?#unity_c_storage_pool_at_or_near_full_capacity.html)"
2. Inserte unidades según la necesidad y los requisitos del pool.
3. Verifique que las unidades estén en línea en Unisphere (UI).
4. Compruebe el grupo de discos que contiene las unidades no configuradas con el siguiente comando. Este comando muestra el grupo de discos que contiene las unidades no configuradas.
uemcli /stor/config/dg -traditional show
Example:
1: ID = dg_28
Drive type = SAS Flash 3
FAST Cache = no
Drive size = 1575700986880 (1.4T)
Vendor size = 1.6T
Rotational speed = 0 rpm
Number of drives = 43
Unconfigured drives = 7
Capacity = 67755142435840 (61.6T)
Recommended number of spares = 25. Compruebe el perfil donde se agregarán las unidades con este comando. Este comando muestra el perfil en el que se agregarán las unidades para expandir el pool según el grupo RAID. Además, compruebe el grupo de discos que pertenece a este perfil.
uemcli /stor/config/profile -traditional -configurable show
Example:
1: ID = tprofile_1
Type = Traditional
Description = SAS Flash RAID5 (4+1)
Drive type = SAS Flash
RAID level = 5
Maximum capacity = 7878504934400 (7.1T)
Stripe length = 5
Disk group = dg_28
Maximum drives to configure = 5
Maximum capacity to configure = 6302669729792 (5.7T)
6. Ejecute esto uemcli para expandir el pool. En este ejemplo, el grupo de discos es dg_28, el perfil es tprofile_1, el ID del pool que se expandirá es pool_1y la cantidad de unidades para expandir el pool es 5 según el grupo RAID. Después de que el comando da el resultado como "Operation completed successfully.", vuelva a comprobar el número de unidades y el estado del pool mediante el paso 1.
uemcli -d 10.0.0.0 -u admin -p 'MyPassword123!' /stor/config/pool -id pool_1 extend -diskGroup dg_28 -drivesNumber 5 -storProfile tprofile_1
Example:
15:12:26 root@xyz spb:/cores/service/user> uemcli /stor/config/pool show -detail
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection
1: ID = pool_1
Type = Traditional
Name = File and VMware Production Pool
Description = Default production pool
Total space = 55718073860096 (50.6T)
Current allocation = 47159708909568 (42.8T)
Preallocated = 97010941952 (90.3G)
Remaining space = 8461354008576 (7.6T)
Subscription = 66559913492480 (60.5T)
Subscription percent = 119%
Alert threshold = 70%
Drives = 41 x 1.6T SAS Flash 3
Number of drives = 41
RAID level = 5
Stripe length = Mixed
Rebalancing = yes
Rebalancing progress = 0%
Health state = OK_BUT (7)
Health details = "This storage pool has exceeded the capacity threshold you specified. To allocate more storage space, add additional disks to your system. (https://10.120.162.226/help/webhelp/en_US/index.html?#unity_c_storage_pool_at_or_near_full_capacity.html)"
Protection size used = 0
Non-base size used = 0
Auto-delete state = Idle
Auto-delete paused = no
Auto-delete pool full threshold enabled = yes
Auto-delete pool full high water mark = 95%
Auto-delete pool full low water mark = 85%
Auto-delete snapshot space used threshold enabled = no
Auto-delete snapshot space used high water mark = 25%
Auto-delete snapshot space used low water mark = 20%
Compression space saved = 2968627707904 (2.6T)
Compression Percent = 6%
Compression Ratio = 1.1:1
Data Reduction space saved = 2968627707904 (2.6T)
Data Reduction Percent = 6%
Data Reduction Ratio = 1.1:1
All flash pool = yesAdditional Information
Consulte para obtener información sobre la configuración del pool Documentation/unity-family/unity-p-pool-config, que se encuentra en el sitio web de soporte de Dell.
Affected Products
Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity FamilyProducts
Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity FamilyArticle Properties
Article Number: 000020429
Article Type: How To
Last Modified: 07 يوليو 2026
Version: 8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.