Dell Unity: 복제 실패: "유효성 검사 실패(0x840c)"
Summary: Unity에서 복제하는 동안 0x840c(Failed To Validate)로 확인 및 업데이트 실패(사용자 수정 가능)
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
고객이 동기식 복제 세션을 설정하려고 합니다.
동기식 복제 관리 포트와 원격 시스템 연결을 생성한 후 "확인 및 업데이트" 작업이 실패합니다.
오류 메시지는 다음과 같습니다.
Failed To Validate (0x840c)
Cause
동기식 복제 관리 인터페이스는 Unisphere 관리 인터페이스와 동일한 물리적 링크를 사용합니다.
고객이 포트당 2개의 MAC 주소만 허용하는 스위치를 Unity 시스템 간에 사용했습니다.
따라서 Unisphere 관리 연결과 SRM 연결 중 하나가 원격 측에 연결될 수 있습니다.
그러나 추가 연결은 허용되지 않았습니다.
Resolution
이 제한 없이 네트워크 스위치를 사용합니다.
또는 물리적 포트당 두 개 이상의 MAC 주소를 허용하도록 스위치 속성을 수정합니다.
Affected Products
Dell Unity 300Products
Dell Unity 300Article Properties
Article Number: 000055027
Article Type: Solution
Last Modified: 03 مارس 2026
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.