Dell Unity: Replicatie wordt niet gesynchroniseerd vanwege "Destination Pool Out Of Space (0x840f)"
Summary: Dell Unity: Replicatie wordt niet gesynchroniseerd vanwege "Destination Pool Out Of Space (0x840f)" (op te lossen door Dell)
Symptoms
Het systeem is geüpgraded naar Unity OE 4.X-code.
Upgraden naar 4.4.0.1534750794
Async-bestandsreplicatie kan niet worden gesynchroniseerd.
De Unisphere-fout luidt: "Kan bestemming niet bijwerken omdat bestemmingspool vol is."
Bestemmingspool geeft echter vrije capaciteit weer.
De uitvoer van de replicatiesessie toont het probleem:
********************************************************************************************************* Session 171798693759_APM0012345678_0000_171798743954_APM0012345679_0000 ********************************************************************************************************* Name = rep_sess_res_27_res_175_APM0012345678_APM0012345679 Session type = file Synchronization type = auto RPO = 10m Resource type = File System Sync State = idle Health state = Degraded/Warning (10) Health details = "The replication session is operating in a degraded state because the storage pool on the destination system has run out of space. Expand the pool to restore normal operation." <<<<<<<<<<< Operational status = Destination Pool Out Of Space (0x840f) <<<<<<<<<<< Source status = Pool Out of Space <<<<<<<<<< Destination status = Pool Out of Space <<<<<<<<< Network status = OK Destination type = remote Destination system = RS_3 Local role = Source Source resource = res_27 Source SP-A interface = 192.168.1.1 Source SP-B interface = 192.168.1.2 Destination resource = res_175 Destination SP-A interface = 192.168.1.3 Destination SP-B interface = 192.168.1.4 Time of last sync = N/A Sync status = Sync transfer rate = N/A Sync transfer size remaining = 331786223616 (309.0G) Previous transfer rate = N/A Average transfer rate = N/A Element pairs = N/A Hourly Snapshot Retention = Hourly snapshots not replicated Daily Snapshot Retention = Daily snapshots not replicated Hourly snapshot keep for = not replicated Hourly snapshot allow auto-delete = not replicated Daily snapshot keep for = not replicated Daily snapshot allow auto-delete = not replicated
EMCSystemLogFile.log
A 09/11/19 18:13:06.114 DART_REP 106c0018 [WARN] System: Source=171798693759_APM0012345678_0000_171798743954_APM0012345679_0000(alias=rep_sess_res_27_res_175_APM0012345678_APM0012345679), starting transfer. Destination has no space available. Source is retrying. Line 3772187: A 09/11/19 18:14:00.656 Health 6077f [WARN] User: Replication session rep_sess_res_27_res_175_APM0012345678_APM0012345679 can not update destination because destination pool is full.
Cause
Dit probleem is relevant voor Unity OE-codes 4.X en hoger.
Het probleem heeft te maken met het bestandssysteem of snapshots met een niet-gehele grootte.
Upgraden naar 4.4.0.1534750794 bracht dit probleem aan het licht: "Kan de bestemming niet bijwerken omdat de bestemmingspool vol is" op bestaande bestandssystemen of snaps met een niet-gehele grootte.
Vóór de upgrade naar 4.4.0.1534750794 waren snaps zonder gehele getallen of bestandssystemen geen probleem.
Alle nieuw gemaakte snaps of bestandssystemen na de upgrade werken naar behoren.
Het probleem is veroorzaakt door niet-gehele bestandssystemen of snapshots die vóór de upgrade zijn gemaakt.
Resolution
Neem contact op met de klantenservice van Dell en raadpleeg dit Dell Knowledge Base-artikel voor verdere hulp.
Upgrade de Unity OE naar de nieuwste GA 5.0 om de oplossing voor dit probleem op te halen.