Dell Unity: Replikeringen synkroniseras inte på grund av "Destination Pool Out Of Space (0x840f)"

Summary: Dell Unity: Replikeringen synkroniseras inte på grund av "Destination Pool Out Of Space (0x840f)" (kan korrigeras av Dell)

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Systemet uppgraderades till Unity OE 4.X-kod.

Uppgradera till 4.4.0.1534750794

Asynkron filreplikering kan inte synkroniseras.
Unisphere-felet är "det går inte att uppdatera målet eftersom målpoolen är full".
Målpoolen visar dock ledig kapacitet.

Replikeringssessionens utdata visar problemet:

*********************************************************************************************************
Session 171798693759_APM0012345678_0000_171798743954_APM0012345679_0000
*********************************************************************************************************
Name = rep_sess_res_27_res_175_APM0012345678_APM0012345679
Session type = file
Synchronization type = auto
RPO = 10m
Resource type = File System
Sync State = idle
Health state = Degraded/Warning (10)
Health details = "The replication session is operating in a degraded state because the storage pool on the destination system has run out of space. Expand the pool to restore normal operation."  <<<<<<<<<<<
Operational status = Destination Pool Out Of Space (0x840f)   <<<<<<<<<<<
Source status = Pool Out of Space  <<<<<<<<<<
Destination status = Pool Out of Space  <<<<<<<<<
Network status = OK
Destination type = remote
Destination system = RS_3
Local role = Source
Source resource = res_27
Source SP-A interface = 192.168.1.1
Source SP-B interface = 192.168.1.2
Destination resource = res_175
Destination SP-A interface = 192.168.1.3
Destination SP-B interface = 192.168.1.4
Time of last sync = N/A
Sync status =
Sync transfer rate = N/A
Sync transfer size remaining = 331786223616 (309.0G)
Previous transfer rate = N/A
Average transfer rate = N/A
Element pairs = N/A
Hourly Snapshot Retention = Hourly snapshots not replicated
Daily Snapshot Retention = Daily snapshots not replicated
Hourly snapshot keep for = not replicated
Hourly snapshot allow auto-delete = not replicated
Daily snapshot keep for = not replicated
Daily snapshot allow auto-delete = not replicated

EMCSystemLogFile.log

A 09/11/19 18:13:06.114 DART_REP 106c0018 [WARN] System: Source=171798693759_APM0012345678_0000_171798743954_APM0012345679_0000(alias=rep_sess_res_27_res_175_APM0012345678_APM0012345679), starting transfer. Destination has no space available. Source is retrying.
Line 3772187: A 09/11/19 18:14:00.656 Health 6077f [WARN] User: Replication session rep_sess_res_27_res_175_APM0012345678_APM0012345679 can not update destination because destination pool is full.

 

Cause

Det här problemet är relevant för Unity OE-koder 4.X och senare.

Problemet är relaterat till filsystem eller ögonblicksbilder som inte var heltalsstora.

Uppgradering till 4.4.0.1534750794 identifierade problemet "Det går inte att uppdatera målet eftersom målpoolen är full" på befintliga filsystem eller snapshots som inte var heltalsstora .
Före uppgraderingen till 4.4.0.1534750794 var det inte ett problem att ha icke-heltalssnaps eller filsystem.

Alla nyskapade snapshots eller filsystem efter uppgraderingen fungerar som de ska.
Problemet är icke-heltalsfilsystem eller snapshots som skapades före uppgraderingen.

 

Resolution

Kontakta Dells kundsupport och hänvisa till denna artikel i Dells kunskapsdatabas om du behöver mer hjälp.

Uppgradera Unity OE till senaste GA 5.0 för att åtgärda problemet.

 

Affected Products

Dell EMC Unity Family

Products

Dell EMC Unity Family
Article Properties
Article Number: 000055683
Article Type: Solution
Last Modified: 17 أبريل 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.