Dell Unity: "Hedef Havuzda Alan Yetersiz (0x840f)" Nedeniyle Çoğaltma Senkronize Edilemiyor

Summary: Dell Unity: Hedef Havuzda Alan Kalmadı (0x840f)" Nedeniyle Çoğaltma Senkronize Edilemiyor (Dell Tarafından Düzeltilebilir)

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Sistem, Unity OE 4.X koduna yükseltildi.

4.4.0.1534750794 sürümüne yükseltme

Async File Replication is Failing to Sync
.Unisphere Hatası: "Hedef havuz dolu olduğundan hedef güncellenemiyor"
.Ancak Hedef Havuzda boş kapasite gösteriliyor.

Çoğaltma Oturumu Çıktısı Sorunu Gösterir:

*********************************************************************************************************
Session 171798693759_APM0012345678_0000_171798743954_APM0012345679_0000
*********************************************************************************************************
Name = rep_sess_res_27_res_175_APM0012345678_APM0012345679
Session type = file
Synchronization type = auto
RPO = 10m
Resource type = File System
Sync State = idle
Health state = Degraded/Warning (10)
Health details = "The replication session is operating in a degraded state because the storage pool on the destination system has run out of space. Expand the pool to restore normal operation."  <<<<<<<<<<<
Operational status = Destination Pool Out Of Space (0x840f)   <<<<<<<<<<<
Source status = Pool Out of Space  <<<<<<<<<<
Destination status = Pool Out of Space  <<<<<<<<<
Network status = OK
Destination type = remote
Destination system = RS_3
Local role = Source
Source resource = res_27
Source SP-A interface = 192.168.1.1
Source SP-B interface = 192.168.1.2
Destination resource = res_175
Destination SP-A interface = 192.168.1.3
Destination SP-B interface = 192.168.1.4
Time of last sync = N/A
Sync status =
Sync transfer rate = N/A
Sync transfer size remaining = 331786223616 (309.0G)
Previous transfer rate = N/A
Average transfer rate = N/A
Element pairs = N/A
Hourly Snapshot Retention = Hourly snapshots not replicated
Daily Snapshot Retention = Daily snapshots not replicated
Hourly snapshot keep for = not replicated
Hourly snapshot allow auto-delete = not replicated
Daily snapshot keep for = not replicated
Daily snapshot allow auto-delete = not replicated

EMCSystemLogFile.log

A 09/11/19 18:13:06.114 DART_REP 106c0018 [WARN] System: Source=171798693759_APM0012345678_0000_171798743954_APM0012345679_0000(alias=rep_sess_res_27_res_175_APM0012345678_APM0012345679), starting transfer. Destination has no space available. Source is retrying.
Line 3772187: A 09/11/19 18:14:00.656 Health 6077f [WARN] User: Replication session rep_sess_res_27_res_175_APM0012345678_APM0012345679 can not update destination because destination pool is full.

 

Cause

Bu sorun, Unity OE Kodları 4.X ve üzeri ile ilgilidir.

Sorun, tam sayı olmayan boyuttaki FileSystem veya Anlık Görüntüler ile ilgilidir.

4.4.0.1534750794 sürümüne yükseltme işlemi, tam sayı boyutu olmayan mevcut dosya sistemlerinde veya anlık görüntülerde bu "hedef havuz dolu olduğundan hedef güncelleştirilemiyor" sorununu ortaya çıkardı.
4.4.0.1534750794 sürümüne yükseltmeden önce, tam sayı olmayan anlık görüntülere veya dosya sistemlerine sahip olmak bir sorun değildi.

Yükseltmeden sonra yeni oluşturulan snap'ler veya dosya sistemleri düzgün çalışır.
Sorun, yükseltmeden önce oluşturulan tamsayı olmayan dosya sistemleri veya anlık görüntülerdir.

 

Resolution

Dell Müşteri Desteği ile iletişime geçin ve daha fazla yardım için bu Dell Knowledge Base makalesini referans gösterin.

Bu soruna yönelik çözümü almak için Unity OE'yi en son GA 5.0 sürümüne yükseltin.

 

Affected Products

Dell EMC Unity Family

Products

Dell EMC Unity Family
Article Properties
Article Number: 000055683
Article Type: Solution
Last Modified: 17 أبريل 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.