Dell Unity：由于“目标池空间不足 （0x840f）”，复制未同步

Summary: Dell Unity：由于“目标池空间不足 （0x840f）”导致复制不同步（戴尔可纠正）

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

系统已升级到 Unity OE 4.X 代码。

升级到 4.4.0.1534750794

异步文件复制无法同步。
Unisphere 错误为“无法更新目标，因为目标池已满”。
但是，目标池显示可用容量。

复制会话输出显示问题：

*********************************************************************************************************
Session 171798693759_APM0012345678_0000_171798743954_APM0012345679_0000
*********************************************************************************************************
Name = rep_sess_res_27_res_175_APM0012345678_APM0012345679
Session type = file
Synchronization type = auto
RPO = 10m
Resource type = File System
Sync State = idle
Health state = Degraded/Warning (10)
Health details = "The replication session is operating in a degraded state because the storage pool on the destination system has run out of space. Expand the pool to restore normal operation."  <<<<<<<<<<<
Operational status = Destination Pool Out Of Space (0x840f)   <<<<<<<<<<<
Source status = Pool Out of Space  <<<<<<<<<<
Destination status = Pool Out of Space  <<<<<<<<<
Network status = OK
Destination type = remote
Destination system = RS_3
Local role = Source
Source resource = res_27
Source SP-A interface = 192.168.1.1
Source SP-B interface = 192.168.1.2
Destination resource = res_175
Destination SP-A interface = 192.168.1.3
Destination SP-B interface = 192.168.1.4
Time of last sync = N/A
Sync status =
Sync transfer rate = N/A
Sync transfer size remaining = 331786223616 (309.0G)
Previous transfer rate = N/A
Average transfer rate = N/A
Element pairs = N/A
Hourly Snapshot Retention = Hourly snapshots not replicated
Daily Snapshot Retention = Daily snapshots not replicated
Hourly snapshot keep for = not replicated
Hourly snapshot allow auto-delete = not replicated
Daily snapshot keep for = not replicated
Daily snapshot allow auto-delete = not replicated

EMCSystemLogFile.log

A 09/11/19 18:13:06.114 DART_REP 106c0018 [WARN] System: Source=171798693759_APM0012345678_0000_171798743954_APM0012345679_0000(alias=rep_sess_res_27_res_175_APM0012345678_APM0012345679), starting transfer. Destination has no space available. Source is retrying.
Line 3772187: A 09/11/19 18:14:00.656 Health 6077f [WARN] User: Replication session rep_sess_res_27_res_175_APM0012345678_APM0012345679 can not update destination because destination pool is full.

 

Cause

此问题与 Unity OE 代码 4.X 及更高版本相关。

此问题与非整数大小的文件系统或快照有关。

升级到 4.4.0.1534750794 在非 整数 大小的现有文件系统或快照上暴露了此问题“无法更新目标，因为目标池已满”。
在升级到 4.4.0.1534750794 之前，拥有非整数快照或文件系统不是问题。

升级后新创建的任何快照或文件系统均正常工作。
在升级之前创建的非整数文件系统或快照会出现此问题。

 

Resolution

请联系戴尔客户支持，并引用此戴尔知识库文章以获得进一步的帮助。

将 Unity OE 升级到最新的 GA 5.0 以获取此问题的修复。

 

Affected Products

Dell EMC Unity Family

Products

Dell EMC Unity Family
Article Properties
Article Number: 000055683
Article Type: Solution
Last Modified: 17 أبريل 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.