Dell Unity: UEMCLI Operation Failed with Error Code 0x6000001

Summary: This article addresses a UEMCLI execution failure characterized by Error Code 0x6000001, where the system returns an “Operation failed” message indicating access has been denied.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

13:53:17 service @FNMXXXXXXXX spa:/cores/service/user# uemcli -u XXXXX -p XXXXX /stor/prov/luns/lun create -name Test -pool "LUN Testing" -size 10G -spOwner spa -thin yes

Operation failed. Error code: 0x6000001
You do not have access to perform the requested operation. (Error Code:0x6000001)

Cause

This error can occur if the user specified in the command does not have sufficient permissions to execute the operation, or if the provided username or password is incorrect.

Resolution

Ensure the specified user has the appropriate permissions to execute the command. Note that the service user is not supported for UEMCLI operations. Additionally, verify that the username and password are correct to avoid authentication failures.

Affected Products

Dell EMC Unity, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Hybrid
Article Properties
Article Number: 000090633
Article Type: Solution
Last Modified: 02 يوليو 2026
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.