PowerEdge: Import eller rydning af fremmede konfigurationer på PERC-controllere

Summary: Artiklen forklarer, hvad en fremmed konfiguration er, og hvordan du fejlfinder den.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

  • RAID-systemstatus vil blive forringet, hvis en enkelt disk med to diske (afhængigt af systemtypen) er i en fremmed konfiguration.

  • RAID-systemstatus ville mislykkes, hvis mere end to diske er i en fremmed konfiguration (afhængigt af systemtypen) 

Eksempler:

  1. RAID 5-status forringes på grund af én disk i fremmed konfigurationstilstand.

  2. RAID 5 vises mislykket på grund af mere end to diske i en fremmed konfigurationstilstand.

  3. RAID 6-visning mislykkedes på grund af mere end tre diske i en fremmed konfigurationstilstand.

  4. RAID 10 viser forringet på grund af en enkelt disk i hvert span pare, der går ind i en fremmed konfiguration.

  5. RAID 10 viser mislykket tilstand på grund af to diske i et enkelt tidsrum, der går ind i en fremmed konfiguration

 

Reason:

PERC-controllerens konfiguration af harddisken er enten ukendt eller inkonsistent med dens aktuelle konfiguration.

 

Trin til fejlfinding:

Hvis flere diske har en fremmed konfiguration, og systemet (som i RAID 5) ikke fungerer, er systemet i en fejlbehæftet tilstand. Prøv at udføre følgende trin:

  1. Kontroller controlleren eller LCC-loggen (Lifecycle Controller) for at se, hvilken disk der sidst blev indsat i fremmed disk, men kontroller tidsstemplerne i logfilernes ether.
  2. Fjern de første diske, der gik ind i en fremmed konfiguration, og efterlad dem på den sidste disk, der gik ind i en fremmed konfiguration, fordi den har de nyeste data.
  3. Importer disken.
  4. Hvis disken importerer
    1. Arrayet går i en forringet tilstand.
    2. Installer den første disk, der blev fjernet, og importer den.
  5. Hvis disken ikke importeres, skal du rydde den fremmede konfiguration og angive den som en aktiv redundant enhed, så den kan genopbygges i RAID-arrayet.
Bemærk: Hvis flere systemer, der bruger de samme harddiske, indeholder fremmede konfigurationer, skal handlingen baseres på alle systemerne. Hvis et system fungerer, og et andet system IKKE fungerer, skal den fremmede konfiguration importeres.

Affected Products

PowerEdge XR2, PowerEdge R240, PowerEdge R250, PowerEdge R260, PowerEdge R340, PowerEdge R350, PowerEdge R360, PowerEdge R440, PowerEdge R450, PowerEdge R470, PowerEdge R540, PowerEdge R550, PowerEdge R640, PowerEdge R6415, PowerEdge R650 , PowerEdge R650xs, PowerEdge R6515, PowerEdge R6525, PowerEdge R660, PowerEdge R660xs, PowerEdge R6615, PowerEdge R6625, PowerEdge R670, PowerEdge R740, PowerEdge R740XD, PowerEdge R740XD2, PowerEdge R7415, PowerEdge R7425, PowerEdge R750, PowerEdge R750XA, PowerEdge R750xs, PowerEdge R7515, PowerEdge R7525, PowerEdge R760, PowerEdge R760XA, PowerEdge R760xd2, PowerEdge R760xs, PowerEdge R7615, PowerEdge R7625, PowerEdge R770, PowerEdge R7715, PowerEdge R7725, PowerEdge R840, PowerEdge R860, PowerEdge R940, PowerEdge R940xa, PowerEdge R960, PowerEdge T140, PowerEdge T150, PowerEdge T160, PowerEdge T340, PowerEdge T350, PowerEdge T360, PowerEdge T40, PowerEdge T440, PowerEdge T550, PowerEdge T560, PowerEdge T640, PowerEdge XE2420, PowerEdge XE7100, PowerEdge XE7420, PowerEdge XE7440, PowerEdge XE7745, PowerEdge XE8545, PowerEdge XE8640, PowerEdge XE9640, PowerEdge XE9680, PowerEdge XR11, PowerEdge XR12, PowerEdge XR4000r, PowerEdge XR4000w, PowerEdge XR4000z, PowerEdge XR4510c, PowerEdge XR4520c, PowerEdge XR5610, PowerEdge XR7620, PowerEdge XR8000r, PowerEdge XR8610t, PowerEdge XR8620t ...
Article Properties
Article Number: 000139205
Article Type: How To
Last Modified: 13 مايو 2026
Version:  7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.