PowerEdge: Systeem loopt vast tijdens POST met UEFI0136 Kan CSIOR niet uitvoeren
Summary: Oplossing voor server die vastloopt tijdens POST met UEFI136 fout als gevolg van ontoegankelijke Lifecycle Controller-firmware tijdens CSIOR-uitvoering
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
De volgende fout kan worden waargenomen tijdens POST:
UEFI0136: Unable to execute CSIOR (Collect System Inventory on Restart) because the Lifecycle Controller (LC) firmware was not accessible.
Do one of the following: 1) Restart the system and retry the operation. 2) Update the iDRAC firmware. If the issue persists, contact your service provider
Cause
Lifecycle Controller is niet beschikbaar met CSIOR-foutbericht.
Resolution
- Controleer of de LifeCycle Controller (LCC) Controller is ingeschakeld in de iDRAC-instellingen in System Setup F2.
- Controleer alle USB-apparaten (dat wil zeggen toetsenbord, muis, USB-harde schijven) die rechtstreeks op de server zijn aangesloten. Verwijder die apparaten en test de resultaten.
- Als het probleem nog steeds niet is opgelost, controleert u of er een KVM-switch is aangesloten op de server. Verwijder de KVM van de server om te controleren of het probleem zich blijft voordoen
- Zorg ervoor dat alle hardware up-to-date is, inclusief BIOS, LCC en IDRAC.
De server kan worden gestart zonder de CSIOR-bewerking, druk op F1 om door te gaan met opstarten. Het wordt aangeraden om een onderhoudsvenster in te plannen om het probleem te onderzoeken en op te lossen.
Affected Products
C Series, HS Series, Modular Infrastructure, Rack Servers, Tower Servers, XE Servers, iDRAC8, iDRAC9, Lifecycle Controllers, OEM Server SolutionsProducts
XR ServersArticle Properties
Article Number: 000143332
Article Type: Solution
Last Modified: 05 مايو 2026
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.