VPLEX: How to move an entire logging volume

Summary: This article directs users to the SolVe Desktop/Online procedure called 'How to Move a logging volume', for moving the entire logging volume.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

This procedure can be found in the Solve Desktop Procedure Generator at the following location:
VPlex -> Miscellaneous -> Admin -> Administration procedures -> Manage -> Move a logging volume

If you want to only want to move one leg of a logging volume refer to KB article Deployment KB: VPLEX: How to move one leg of a logging volume.

If SolVe Desktop is required, use this KB article for SolVe Desktop Procedure Generator installation: How to download and install SolVe Desktop? 

KB article VPLEX: Shutdown Procedures for VS1, VS2 and VS6 also provides details when generating VPLEX procedures using SolVe Desktop.
This KB article discusses shutdown procedures and how to generate them, yet the principles apply for any procedures for which you may want to generate copies.

Affected Products

VPLEX Series

Products

VPLEX Series, VPLEX VS2, VPLEX VS6
Article Properties
Article Number: 000158339
Article Type: How To
Last Modified: 06 يناير 2026
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.