PowerScale OneFS 8.0 e versioni successive: I cluster vengono rilevati come Fraunhofer FOKUS, non Dell

Summary: In OneFS 8.0 e versioni successive, i cluster PowerScale vengono individuati come Fraunhofer FOKUS anziché Dell.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

In OneFS 8.0 e versioni successive, un cluster viene rilevato con un ID di oggetto (OID) 1.3.6.1.4.1.12325 (Fraunhofer FOKUS) anziché 1.3.6.1.4.1.12124 (Dell)

Cause

In OneFS 8.0 e versioni successive, l'impostazione predefinita snmpd.conf riferimenti Fraunhofer FOKUS OID alla linea:

sysObjectId  = 1.3.6.1.4.1.12325.1.1.2.1.$(system)

Resolution

  1. Edit: /etc/snmpd.config 
Sostituire la riga:
sysObjectId  = 1.3.6.1.4.1.12325.1.1.2.1.$(system)
Con:
sysObjectId  = 1.3.6.1.4.1.12124.1.1.2.1.$(system)
  1. Riavvia bsnmp:
# kill $(pgrep bsnmpd)

Affected Products

PowerScale OneFS
Article Properties
Article Number: 000193759
Article Type: Solution
Last Modified: 12 مايو 2026
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.