PowerEdge: iDRAC9 no puede conectarse a la imagen remota a través de IPv6 mediante el puerto no predeterminado y eHTML5

Summary: La asignación de una RemoteImage a través de IPv6 con un puerto de servidor web no predeterminado y un plug-in eHTML5 falla en Integrated Dell Remote Access Controller 9 (iDRAC9)

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

El intento de mapear una ISO remota mediante IPv6 a un servidor web que se ejecuta en un puerto no estándar http/80 https/443 falla en Integrated Dell Remote Access Controller 9 (iDRAC9) cuando idrac.virtualconsole.plugintype está configurado en eHTML5. 

Las siguientes interfaces se ven afectadas, ya que iDRAC aprovecha el mismo código eHTML5. 

  • Opción Recurso compartido de archivos remotos en la interfaz de usuario de iDRAC
  • RACADM remoteimage command
  • REDFISH VirtualMedia.InsertMedia acción 

RemoteFileShare/Racadm Ejemplo de error

$ racadm remoteimage -c -l http://[fd00:11::249]:8080/repo/w10-pe-new.iso
ERROR: Unable to perform requested operation.

Ejemplo de error de Redfish 

2022-02-22 00:13:37 Error : HTTP Status : 400 ; POST /redfish/v1/Managers/iDRAC.Embedded.1/VirtualMedia/CD/Actions/VirtualMedia.InsertMedia failed after 0 seconds
{
    "error": {
        "@Message.ExtendedInfo": [
            {
                "Message": "Unable to mount remote share http://[fd00:11::249]:8080/iso/bootimage.iso [[2620].",
                "MessageArgs": [
                    http://[fd00:11::249]:8080/iso/bootimage.iso [[2620]
                ],
                MessageArgs@odata.count: 1,
                "MessageId": "IDRAC.2.5.RAC0720",
                "RelatedProperties": [
                    "#/Image"
                ],
                RelatedProperties@odata.count: 1,
                "Resolution": "Retry the operation.",
                "Severity": "Informational"
            }
        ],
        "code": "Base.1.8.GeneralError",
        "message": "A general error has occurred. See ExtendedInfo for more information"
    }
}

Cause

Los puertos de URL están codificados de forma rígida http/80 y https/443 para IPv6, ya que la implementación de eHTML5 no diferencia ':' en la dirección IPv6 frente a ':' para el puerto del servidor en la URL. 

Resolution

Dell abordó el problema con el plug-in de eHTML5 en la versión 5.10.30.00 de junio de 2022.

Solución alternativa
Cambie la opción idrac.virtualconsole.plugintype a HTML5.

$ racadm help idrac.virtualconsole.plugintype
PluginType                -- Specifies the plugin type to use when running Virtual Console from a browser.
Usage                     -- 0-ActiveX; 1-Java; 2-HTML5; 3-eHTML5; Default - 3
Required License          -- Virtual Console
Dependency                -- While there are active Virtual Console, Virtual Media or Remote File Share sessions, the value cannot be changed from ActiveX/Java/HTML5 to eHTML5 or from eHTML5 to ActiveX/Java/HTML5.

$ racadm set idrac.virtualconsole.plugintype 2
[Key=idrac.Embedded.1#VirtualConsole.1]
Object value modified successfully

$ racadm remoteimage -c -l http://[fd00:11::249]:8080/repo/w10-pe-new.iso
Remote Image is now Configured

$ racadm remoteimage -s
Remote File Share is Enabled
UserName
Password
ShareName http://[fd00:11::249]:8080/repo/w10-pe-new.iso

Affected Products

iDRAC9
Article Properties
Article Number: 000195913
Article Type: Solution
Last Modified: 13 مايو 2026
Version:  7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.