PowerEdge: iDRAC9 не може підключити віддалене зображення через IPv6 за допомогою нестандартного порту та eHTML5
Summary: Відображення RemoteImage на IPv6 з нестандартним портом вебсервера та плагіном eHTML5 не працює на Integrated Dell Remote Access Controller 9 (iDRAC9)
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Спроба віднести віддалений ISO за допомогою IPv6 на вебсервер із нестандартним портом http/80 https/443 не вдається на Integrated Dell Remote Access Controller 9 (iDRAC9), коли idrac.virtualconsole.plugintype встановлено на eHTML5.
Наступні інтерфейси зазнають впливу, оскільки iDRAC використовує той самий код eHTML5.
- Опція віддаленого обміну файлами з iDRAC UI
RACADM remoteimageКомандуванняREDFISH VirtualMedia.InsertMediaБойові дії
RemoteFileShare/Racadm Приклад помилки
$ racadm remoteimage -c -l http://[fd00:11::249]:8080/repo/w10-pe-new.iso
ERROR: Unable to perform requested operation.
Приклад помилки червоної риби
2022-02-22 00:13:37 Error : HTTP Status : 400 ; POST /redfish/v1/Managers/iDRAC.Embedded.1/VirtualMedia/CD/Actions/VirtualMedia.InsertMedia failed after 0 seconds
{
"error": {
"@Message.ExtendedInfo": [
{
"Message": "Unable to mount remote share http://[fd00:11::249]:8080/iso/bootimage.iso [[2620].",
"MessageArgs": [
http://[fd00:11::249]:8080/iso/bootimage.iso [[2620]
],
MessageArgs@odata.count: 1,
"MessageId": "IDRAC.2.5.RAC0720",
"RelatedProperties": [
"#/Image"
],
RelatedProperties@odata.count: 1,
"Resolution": "Retry the operation.",
"Severity": "Informational"
}
],
"code": "Base.1.8.GeneralError",
"message": "A general error has occurred. See ExtendedInfo for more information"
}
}
Cause
URL-порти жорстко закодовані як http/80 та https/443 для IPv6, оскільки реалізація eHTML5 не розрізняє ': 's в IPv6 адресі та ':' для серверного порту в URL.
Resolution
Dell вирішила цю проблему з плагіном eHTML5 у червневому випуску 5.10.30.00 за червень 2022 року.
Обхідний
шляхЗмініть idrac.virtualconsole.plugintype на HTML5.
$ racadm help idrac.virtualconsole.plugintype PluginType -- Specifies the plugin type to use when running Virtual Console from a browser. Usage -- 0-ActiveX; 1-Java; 2-HTML5; 3-eHTML5; Default - 3 Required License -- Virtual Console Dependency -- While there are active Virtual Console, Virtual Media or Remote File Share sessions, the value cannot be changed from ActiveX/Java/HTML5 to eHTML5 or from eHTML5 to ActiveX/Java/HTML5. $ racadm set idrac.virtualconsole.plugintype 2 [Key=idrac.Embedded.1#VirtualConsole.1] Object value modified successfully $ racadm remoteimage -c -l http://[fd00:11::249]:8080/repo/w10-pe-new.iso Remote Image is now Configured $ racadm remoteimage -s Remote File Share is Enabled UserName Password ShareName http://[fd00:11::249]:8080/repo/w10-pe-new.iso
Affected Products
iDRAC9Article Properties
Article Number: 000195913
Article Type: Solution
Last Modified: 13 مايو 2026
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.