Mainframe Enablers TF-klon/snap: VOLUME-handlingen afsluttes med en EQCA128E meddelelse, selvom handlingen fuldføres korrekt
Summary: Under SNAP VOLUME-handlinger vises en fejlagtig EQCA128E meddelelse, selvom alle funktioner kørte korrekt.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Der udsendes en fejlmeddelelse for SNAP VOLUME-handlinger:
EQCA128E UNABLE TO DETERMINE REMOTE DA FOR SYSCALL EXECUTION -00-00-00-
Cause
Dette problem blev introduceret med C2403-vedligeholdelse af Mainframe Enablers 10.0.0 og 10.1.0.
*** TIMEFINDER MF SNAP V10.1.0 (019) - SCF V10.01.00 (0009) *** *** TIMEFINDER MF SNAP V10.0.0 (045) - SCF V10.00.00 (0064) ***
Resolution
Permanent løsning:
- For mainframe enablers (MFE) 10.1.0 er PTF-SNA1024 (Program Temporary Fix) tilgængelig til at løse problemet. Download PTF fra Dell Support.
- For mainframe enablers (MFE) 10.0.0 er PTF-SNA0048 (Program Temporary Fix) tilgængelig til at løse problemet. Download PTF fra Dell Support.
Additional Information
PTF følgebreve:
MFE 10.1 SNA1024:
++PTF(SNA1024) REWORK(2024124) .
++VER(Z038) FMID(SSNPA10)
PRE(
SNA1020
)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
* PROBLEM FIXED: MFE-17116
* USERS AFFECTED: SnapVX and TF/Clone users
* PROBLEM DESCRIPTION: Error message EQCA128E is displayed
* when running SnapVX or TF/Clone
* commands using remote syntax.
* DESCRIPTION DETAIL:
*
* Error message 'EQCA128E UNABLE TO DETERMINE REMOTE DA FOR
* SYSCALL EXECUTION 00-00-00' is displayed when running
* SnapVX or TF/Clone commands using remote syntax. This
* message should not be printed for VMAX/PowerMax systems
* running microcode 5876 or higher.
*
* PROBLEM RESOLUTION:
*
* SnapVX and TF/Clone have been updated to avoid printing the
* EQCA128E message for VMAX/PowerMax systems running microcode
* 5876 and higher.
*
* MODULES: EMCQCAPL
*
* ------------------------------------------------------------
* SNA1024 3 May 2024 18:02:38
* ------------------------------------------------------------
* OPT Summary
* The following OPT was addressed by this PTF:
*
* MFE-17116
*
*-------------------------------------------------------------
*/ .
MFE 10.0 SNA0048:
++PTF(SNA0048) REWORK(2024109) .
++VER(Z038) FMID(SSNPA00)
PRE(
SNA0047
)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
* PROBLEM FIXED: MFE-17117
* USERS AFFECTED: SnapVX and TF/Clone users
* PROBLEM DESCRIPTION: Error message EQCA128E is displayed
* when running SnapVX or TF/Clone
* commands using remote syntax.
* DESCRIPTION DETAIL:
*
* Error message 'EQCA128E UNABLE TO DETERMINE REMOTE DA FOR
* SYSCALL EXECUTION 00-00-00' is displayed when running
* SnapVX or TF/Clone commands using remote syntax. This
* message should not be printed for VMAX/PowerMax systems
* running microcode 5876 or higher.
*
* PROBLEM RESOLUTION:
*
* SnapVX and TF/Clone have been updated to avoid printing the
* EQCA128E message for VMAX/PowerMax systems running microcode
* 5876 and higher.
*
* MODULES: EMCQCAPL
*
* ------------------------------------------------------------
* SNA0048 18 Apr 2024 19:55:53
* ------------------------------------------------------------
* OPT Summary
* The following OPT was addressed by this PTF:
*
* MFE-17117
*
*-------------------------------------------------------------
*/ .
Affected Products
Mainframe EnablersArticle Properties
Article Number: 000223689
Article Type: Solution
Last Modified: 09 يونيو 2026
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.