Mainframe Enablers TF-Clone/Snap: VOLUME-Vorgang wird mit einer EQCA128E-Meldung abgeschlossen, obwohl der Vorgang erfolgreich abgeschlossen wurde
Summary: Während SNAP VOLUME-Vorgängen wird eine fehlerhafte EQCA128E-Meldung angezeigt, obwohl alle Funktionen erfolgreich ausgeführt wurden.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Für SNAP VOLUME-Vorgänge wird eine Fehlermeldung ausgegeben:
EQCA128E UNABLE TO DETERMINE REMOTE DA FOR SYSCALL EXECUTION -00-00-00-
Cause
Dieses Problem wurde mit der C2403-Wartung für Mainframe Enablers 10.0.0 und 10.1.0 eingeführt.
*** TIMEFINDER MF SNAP V10.1.0 (019) - SCF V10.01.00 (0009) *** *** TIMEFINDER MF SNAP V10.0.0 (045) - SCF V10.00.00 (0064) ***
Resolution
Dauerhafte Lösung:
- Für Mainframe Enablers (MFE) 10.1.0 ist die SNA1024 Program Temporary Fix (PTF) verfügbar, um das Problem zu beheben. Laden Sie den PTF vom Dell Support herunter.
- Für Mainframe Enablers (MFE) 10.0.0 ist die SNA0048 Program Temporary Fix (PTF) verfügbar, um das Problem zu beheben. Laden Sie den PTF vom Dell Support herunter.
Additional Information
PTF-Anschreiben:
MFE 10.1 SNA1024:
++PTF(SNA1024) REWORK(2024124) .
++VER(Z038) FMID(SSNPA10)
PRE(
SNA1020
)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
* PROBLEM FIXED: MFE-17116
* USERS AFFECTED: SnapVX and TF/Clone users
* PROBLEM DESCRIPTION: Error message EQCA128E is displayed
* when running SnapVX or TF/Clone
* commands using remote syntax.
* DESCRIPTION DETAIL:
*
* Error message 'EQCA128E UNABLE TO DETERMINE REMOTE DA FOR
* SYSCALL EXECUTION 00-00-00' is displayed when running
* SnapVX or TF/Clone commands using remote syntax. This
* message should not be printed for VMAX/PowerMax systems
* running microcode 5876 or higher.
*
* PROBLEM RESOLUTION:
*
* SnapVX and TF/Clone have been updated to avoid printing the
* EQCA128E message for VMAX/PowerMax systems running microcode
* 5876 and higher.
*
* MODULES: EMCQCAPL
*
* ------------------------------------------------------------
* SNA1024 3 May 2024 18:02:38
* ------------------------------------------------------------
* OPT Summary
* The following OPT was addressed by this PTF:
*
* MFE-17116
*
*-------------------------------------------------------------
*/ .
MFE 10.0 SNA0048:
++PTF(SNA0048) REWORK(2024109) .
++VER(Z038) FMID(SSNPA00)
PRE(
SNA0047
)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
* PROBLEM FIXED: MFE-17117
* USERS AFFECTED: SnapVX and TF/Clone users
* PROBLEM DESCRIPTION: Error message EQCA128E is displayed
* when running SnapVX or TF/Clone
* commands using remote syntax.
* DESCRIPTION DETAIL:
*
* Error message 'EQCA128E UNABLE TO DETERMINE REMOTE DA FOR
* SYSCALL EXECUTION 00-00-00' is displayed when running
* SnapVX or TF/Clone commands using remote syntax. This
* message should not be printed for VMAX/PowerMax systems
* running microcode 5876 or higher.
*
* PROBLEM RESOLUTION:
*
* SnapVX and TF/Clone have been updated to avoid printing the
* EQCA128E message for VMAX/PowerMax systems running microcode
* 5876 and higher.
*
* MODULES: EMCQCAPL
*
* ------------------------------------------------------------
* SNA0048 18 Apr 2024 19:55:53
* ------------------------------------------------------------
* OPT Summary
* The following OPT was addressed by this PTF:
*
* MFE-17117
*
*-------------------------------------------------------------
*/ .
Affected Products
Mainframe EnablersArticle Properties
Article Number: 000223689
Article Type: Solution
Last Modified: 09 يونيو 2026
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.