PowerFlex 4.x Opgradering af Dell PowerSwitch-switche

Summary: Dette afsnit omhandler procedurerne til opgradering af Dell PowerSwitch- og Cisco Nexus-switche. Procedurerne for opgradering af Cisco Nexus-switche kan variere afhængigt af den NX-OS-version, der kører på Cisco Nexus-switchene. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Opgradering af Dell PowerSwitch-switche

PowerFlex Manager understøtter flere Dell PowerSwitch-modeller med specifikke firmware- og softwarekomponenter.

Du skal opgradere switchene i følgende rækkefølge:

  • Administrationsswitche
  • Adgangsafbrydere
  • Sammenlægningsswitche
Følgende arbejdsgang er relevant under opgradering af Dell PowerSwitch-switchene i en ny PowerFlex Manager:
  1. Opgrader Dell PowerSwitch-switchene
  2. Opgrader OS-softwareversionen
  3. Opgrader BIOS-versionen
  4. Opgrader BMC-versionen
  5. Opgrader FPGA-versionen
  6. Opgrader ONIE-versionen

 

Opgrader Dell PowerSwitch-switche ved hjælp af PowerFlex Manager

Brug denne procedure til at opgradere Dell PowerSwitch-switchene i PowerFlex Manager.

Om denne opgave

IC til standardoverholdelse bruges altid til delte ressourcer, f.eks. switche.
SEDDEL:Hvis der anvendes delvis netværksautomatisering, skal du se Dell PowerFlex-enhed med PowerFlex 4.x-administrationsvejledning for at få oplysninger om manuelle switchopgraderinger.
SEDDEL:For PowerFlex-versioner før 4.5 skal firmwarekomponenterne opdateres manuelt for alle andre Dell-switche end softwarekomponenterne.

Forudsætninger

Sørg for, at du har taget en sikkerhedskopi af switchkonfigurationerne. Se Sikkerhedskopiering af miljøet for at få flere oplysninger.

Trin

  1. Log på PowerFlex Manager.
  2. Opdater switchene én ad gangen. Gå til siden Ressourcer, vælg en switch, i højre side skal du klikke på Ikke-kompatibel med standardkatalog.
  3. Klik på Opdater ressourcer.
  4. Klik på Anvend opdateringer > Ja.
    SEDDEL:Sørg for at opdatere switchene én ad gangen. Vælg ikke flere switche, og opdater dem alle samtidigt. Den mindst krævede version af Open Network Install Environment (ONIE) er 3.40.1.1-6. Før du bruger ONIE-firmwareopdateringsprogrammet, skal du først opgradere switchen til dette minimumskrav, hvis din switch har en ONIE-version, der er lavere end 3.40.1.1-6.
    SEDDEL:VRF (virtuel routing og videresendelse) understøttes kun, når den har et netværk, der dirigeres til PowerFlex Manager-grænsefladen. De fleste kundeudrulninger ved hjælp af lag-2 kan ikke bruge VRF-standardgrænsefladen.

Opgrader Dells operativsystem og firmware manuelt

Dell OS- og firmwareopgraderinger udføres af PowerFlex Manager. Den manuelle procedure er kun til reference. Du kan finde flere oplysninger i: Installations-, opgraderings- og nedgraderingsvejledning til Dell SmartFabric OS10. PowerFlex Manager understøtter ikke PCIe-firmwareopgradering på Dell PowerSwitch-switche. Denne opgradering udføres manuelt.

 

Opgrader PCIe-firmwaren på switche i Dell PowerSwitch S5200-serien

Brug denne procedure til at opgradere PCIe-firmwaren på switche i Dell PowerSwitch S5200-serien.

Om denne opgave

SEDDEL:Filnavnet og versionerne i denne procedure er angivet som et eksempel. De angivne trin er kun til reference.

Forudsætninger

Sørg for, at du har adgang til følgende:
  • OS10-versionen er 10.5.x.x. Hvis ikke, skal du følge IC en for at opgradere til OS10 10.5.x.x.
    • Sørg for, at firmwarekomponenterne svarer til IC'en.
  • Den nyeste PCIe-firmwareversion. Download den nyeste PCIe-firmwareversion x.x fra Dell Technologies-supportwebstedet (f.eks.: onie-update-full-x86_64-dellemc_s5200_c3538-r0.3.40.5.1-24.zip).
  • En seriel konsol til at få adgang til switchen.
  • IP-adresse eller USB-forbindelse fra switch for at få adgang til PCIe-firmwarefilen.

Trin

  1. SSH til switchens administrations-IP-adresse og -type: Vis system.
    Eksempel på output: 
    s5200-switch# show system
Node Id : 1
MAC : 3c:2c:30:7d:74:80
Number of MACs : 384
Up Time : 14 weeks 09:32:24
DiagOS : 3.00.3.41-3
PCIe Version : 2.1

-- Unit 1 --
Status : up
System Identifier : 1
Down Reason : unknown
Digital Optical Monitoring : disable
System Location LED : off
Required Type : S5232F
Current Type : S5232F
Hardware Revision : A00
Software Version : 10.5.4.5
Physical Ports : 32x100G, 2x10GbE
ONIE : 3.40.1.1-9
BMC : 1.07
BIOS : 3.40.0.9-15
OCORE-FPGA@pci_0000_04_00.0 : 3.4
Firmware Updater : 3.40.5.1-24
SSD : L20B12
System CPLD : 0.8
Secondary CPLD 1 : 1.0
Secondary CPLD 2 : 1.0
Secondary CPLD 3 : 0.0
Secondary CPLD 4 : 0.0
    Download PDF-filen fra Dell Networking Firmware Updater v3.40.5.1-26 til S5248F-ON-switch, og sammenlign systemet med minimumssystemkravene.
  2. Godkend ONIE-versionen, skriv: sudo / mnt / onie-boot / onie / tools / bin / onie-version.
    Eksempel på output: 
    ONIE version : 3.40.1.1-9
ONIE vendor_id : 674
ONIE build_machine : dellemc_s5200_c3538
ONIE machine_rev : 0
ONIE arch : x86_64
ONIE
Validate PCIE Firmware Version build_platform : x86_64-dellemc_s5200_c3538-r0
ONIE config_version : 1
ONIE build_date : 2022-05-02T16:29-07:00
ONIE partition_type : gpt
ONIE kernel_version : 4.9.30
ONIE firmware : auto
ONIE switch_asic : bcm
ONIE skip_ethmgmt_macs: no
ONIE grub_image_name: grubx64.efi
ONIE uefi_boot_loader: grubx64.efi
ONIE uefi_arch : x64
  3. Godkend PCIe-firmwareversionen, skriv: sudo hshell -c 'pciephy fw version'.
    Eksempel på output: 
    s5200-switch# system "sudo hshell -c 'pciephy fw version'"
0:soc_flash_init: Flash supported ID = 0x20
PCIe FW loader version: 2.1
PCIe FW version: D102_04
  4. Kopier den nye PCIe-firmwarefil til switchen.
    SEDDEL:PCIe-firmwarefilen er et bundt i firmware-ZIP-filen.
    1. Pak onie-update-full-x86_64-dellemc_s5200_c3538-r0.3.40.5.1-24.zip ud.
    2. Brug den udpakkede fil fra trin a til at pakke XGS_PCIe_gen3_Firmware_02_06_TH3_TD3.zip ud.
    3. Kopier den pcieg3fw.bin fil fra XGS_PCIe_gen3_Firmware_02_06_TH3_TD3.zip til FTP-serveren i stien: /pub/dell/S5200/PCI/fw2.6
    Eksempel på output: 
    S5200-switch# Kopiér ftp://anonymous@10.10.185.188/pub/dell/S5200/PCI/fw2.6/pcieg3fw.binhome://pcieg3fw.bin
kodeord:
Kopieringen lykkedes
    SEDDEL:Andre OS10-understøttede metoder såsom SCP og USB kan også bruges, men er ikke dokumenteret her.
  5. Kontroller, at den nye PCIe-firmwarefil er tilgængelig, skriv: dir home.
    Eksempel på output: 
    s5200-switch# dir home

Directory contents for folder: home
Date (modified) Size (bytes) Name
--------------------- ------------ ------------------------------------------
2023-05-02T06:13:18Z 30720 pcieg3fw.bin
s5200-switch# system "sudo -i"
root@s5200-switch:~# cd /home/admin
root@s5200-switch:/home/admin# ls
pcieg3fw.bin
root@s5200-switch:/home/admin#
  6. Opret forbindelse til switchens serielle konsol, skriv: s5200-switch-console#.
  7. Luk alle Ethernet-grænseflader på switchen, skriv: 
    S5200-switch-console# Konfigurer terminal
S5200-switch-console(config)# Grænsefladeområde E1/1/1-1/1/34
S5200-switch-console(conf-range-eth1/1/1-1/1/34)# nedlukning
    Eksempel på output: 
    <165>1 2023-05-02T06:27:05.376621+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/1
<165>1 2023-05-02T06:27:05.377845+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_OSTATE_DN: Interface operational state is down :ethernet1/1/1
<165>1 2023-05-02T06:27:05.383505+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %OSPFV2_ADJ_CHANGE: OSPF Process VRF default 7, Nbr 10.234.83.25 on ethernet1/1/1 state changed to DOWN
<165>1 2023-05-02T06:27:05.402105+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/2
<165>1 2023-05-02T06:27:05.402174+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_OSTATE_DN: Interface operational state is down :ethernet1/1/2
<165>1 2023-05-02T06:27:05.404604+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %OSPFV2_ADJ_CHANGE: OSPF Process VRF default 7, Nbr 10.234.83.33 on ethernet1/1/2 state changed to DOWN
<165>1 2023-05-02T06:27:05.415249+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/5
<165>1 2023-05-02T06:27:05.426259+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/6
<165>1 2023-05-02T06:27:05.432995+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/7
<165>1 2023-05-02T06:27:05.438967+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/8
<165>1 2023-05-02T06:27:05.446299+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/9
<165>1 2023-05-02T06:27:05.454274+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/10
<165>1 2023-05-02T06:27:05.464857+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/11
<165>1 2023-05-02T06:27:05.479749+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/12
s5200-switch-console(conf-range-eth1/1/1-1/1/34)# <165>1 2023-05-02T06:27:05.479835+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_OSTATE_DN: Interface operational state is down :ethernet1/1/11
<165>1 2023-05-02T06:27:05.492594+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/13
<165>1 2023-05-02T06:27:05.492760+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_OSTATE_DN: Interface operational state is down :ethernet1/1/12
<165>1 2023-05-02T06:27:05.492911+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %STP_ROOT_CHANGE: STP:Root Brg Chg RPVST root changed for vlan 1.
<165>1 2023-05-02T06:27:05.493250+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %STP_ROOT_CHANGE: STP:Root Brg Chg My ID:3c2c.307d.7480 OldRt:1:3c2c.307d.6a00 NewRt:4097:3c2c.307d.7480
<165>1 2023-05-02T06:27:05.503099+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/14
<165>1 2023-05-02T06:27:05.513631+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/15
<165>1 2023-05-02T06:27:05.522458+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/16
<165>1 2023-05-02T06:27:05.530299+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/17
<165>1 2023-05-02T06:27:05.539176+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/18
<165>1 2023-05-02T06:27:05.546300+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/19
<165>1 2023-05-02T06:27:05.553108+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/20
<165>1 2023-05-02T06:27:05.559141+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/21
<165>1 2023-05-02T06:27:05.565057+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/22
<165>1 2023-05-02T06:27:05.571422+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/23
<165>1 2023-05-02T06:27:05.578553+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/24
<165>1 2023-05-02T06:27:05.584956+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/25
<165>1 2023-05-02T06:27:05.591664+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/26
<165>1 2023-05-02T06:27:05.598589+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/27
<165>1 2023-05-02T06:27:05.608060+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/28
<165>1 2023-05-02T06:27:05.618760+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/29
<165>1 2023-05-02T06:27:05.627611+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/30
<165>1 2023-05-02T06:27:05.646174+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/31
<165>1 2023-05-02T06:27:05.646960+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_OSTATE_DN: Interface operational state is down :ethernet1/1/31
<165>1 2023-05-02T06:27:05.788040+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/32
<165>1 2023-05-02T06:27:05.921872+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_OSTATE_DN: Interface operational state is down :ethernet1/1/32
<165>1 2023-05-02T06:27:05.922760+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_OSTATE_DN: Interface operational state is down :port-channel10
<165>1 2023-05-02T06:27:05.922944+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_OSTATE_DN: Interface operational state is down :vlan10
<165>1 2023-05-02T06:27:05.923008+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %LACP_PORT_UNGROUPED: Interface exited port-channel port-channel10 : ethernet1/1/31
<165>1 2023-05-02T06:27:05.923079+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %OSPFV2_ADJ_CHANGE: OSPF Process VRF default 7, Nbr 10.234.83.37 on vlan10 state changed to DOWN
<165>1 2023-05-02T06:27:05.929663+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %STP_ROOT_CHANGE: STP:Root Brg Chg RPVST root changed for vlan 10.
<165>1 2023-05-02T06:27:05.929961+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %STP_ROOT_CHANGE: STP:Root Brg Chg My ID:3c2c.307d.7480 OldRt:10:3c2c.307d.6a00 NewRt:4106:3c2c.307d.7480
<165>1 2023-05-02T06:27:05.930335+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %STP_ROOT_CHANGE: STP:Root Brg Chg RPVST root changed for vlan 67.
<165>1 2023-05-02T06:27:05.930458+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %STP_ROOT_CHANGE: STP:Root Brg Chg My ID:3c2c.307d.7480 OldRt:67:3c2c.307d.6a00 NewRt:4163:3c2c.307d.7480
<165>1 2023-05-02T06:27:05.934420+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %STP_ROOT_CHANGE: STP:Root Brg Chg RPVST root changed for vlan 68.
<165>1 2023-05-02T06:27:05.935704+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %STP_ROOT_CHANGE: STP:Root Brg Chg My ID:3c2c.307d.7480 OldRt:68:3c2c.307d.6a00 NewRt:4164:3c2c.307d.7480
<165>1 2023-05-02T06:27:05.935812+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %LACP_PORT_UNGROUPED: Interface exited port-channel port-channel10 : ethernet1/1/32
<165>1 2023-05-02T06:27:05.935896+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/33
<165>1 2023-05-02T06:27:05.938199+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/34
<165>1 2023-05-02T06:27:05.946947+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/3:1
<165>1 2023-05-02T06:27:05.954930+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :ethernet1/1/4:1
s5200-switch-console(conf-range-eth1/1/1-1/1/34)# exit
    
    
    8. 
   
  8. Grænseflade til nedlukningsstyring på switchen, skriv:
    
    
     
    S5200-switch-console(config)# interface mgmt 1/1/1
S5200-switch-console(conf-if-ma-1/1/1)# nedlukning
     Eksempel på output: 
     
    s5200-switch-console(conf-if-ma-1/1/1)# <165>1 2023-05-02T06:28:01.217946+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_DN: Interface admin state down :mgmt1/1/1
<165>1 2023-05-02T06:28:01.224865+00:00 s5200-switch-console dn_alm 728 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_OSTATE_DN: Interface operational state is down :mgmt1/1/1
s5200-switch-console(conf-if-ma-1/1/1)# end
    
     
    
    
    9. 
   
  9. Kontroller, at alle Ethernet- og administrationsgrænseflader er slukket ned, skriv: s5200-switch-console# vis interfacestatus.
    
    
     Eksempel på output: 
     
    --------------------------------------------------------------------------------------------------
Port Description Status Speed Duplex Mode Vlan Tagged-Vlans
--------------------------------------------------------------------------------------------------
Eth 1/1/1 lab1-gw1 down 0 full -
Eth 1/1/2 lab1-gw2 down 0 full -
Eth 1/1/3:1 lab1-mgmt down 0 full T 10 -
Eth 1/1/4:1 down 0 full A 10 -
Eth 1/1/5 down 0 full A 1 -
Eth 1/1/6 down 0 full A 1 -
Eth 1/1/7 down 0 full A 1 -
Eth 1/1/8 down 0 full A 1 -
Eth 1/1/9 down 0 full A 1 -
Eth 1/1/10 down 0 full A 1 -
Eth 1/1/11 down 0 full A 1 -
Eth 1/1/12 down 0 full A 1 -
Eth 1/1/13 down 0 full A 1 -
Eth 1/1/14 down 0 full A 1 -
Eth 1/1/15 down 0 full A 1 -
Eth 1/1/16 down 0 full A 1 -
Eth 1/1/17 down 0 full A 1 -
Eth 1/1/18 down 0 full A 1 -
Eth 1/1/19 down 0 full A 1 -
Eth 1/1/20 down 0 full A 1 -
Eth 1/1/21 down 0 full A 1 -
Eth 1/1/22 : down 0 full A 1 -
Eth 1/1/23 down 0 full A 1 -
Eth 1/1/24 down 0 full A 1 -
Eth 1/1/25 down 0 full A 1 -
Eth 1/1/26 down 0 full A 1 -
Eth 1/1/27 down 0 full A 1 -
Eth 1/1/28 down 0 full A 1 -
Eth 1/1/29 down 0 full A 1 -
Eth 1/1/30 down 0 full A 1 -
Eth 1/1/31 down 0 full -
Eth 1/1/32 down 0 full -
Eth 1/1/33 down 0 full A 1 -
Eth 1/1/34 down 0 full A 1 -
--------------------------------------------------------------------------------------------------

s5200-switch-console#
    
    
    10. 
   
  10. Opdater PCIe-firmwareversionen, skriv: sudo -i
    
    
     Eksempel på output: 
     
    s5200-switch-console# system "sudo -i"
[sudo] password for admin:
root@s5200-switch-console:~# cd /home/admin
root@s5200-switch-console:/home/admin# ls
pcieg3fw.bin
root@s5200-switch-console:/home/admin# hshell
Welcome to the NPU Shell
type ::exit to exit the shell and ::[npu] to change the default npu
** Idle timeout 300 secs **

SAI.0> pwd
Working Directory: /
SAI.0> cd /home/admin
SAI.0> pwd
Working Directory: /home/admin/
SAI.0> ls
pcieg3fw.bin
SAI.0> pciephy fw load pcieg3fw.bin
0:soc_flash_init: Flash supported ID = 0x20
Opening file: pcieg3fw.bin
Updating PCIE firmware
........................................................................................................................ Done
PCIE firmware updated successfully. Please reset the system...

SAI.0> ::exit

root@s5200-switch-console:/home/admin#

root@s5200-switch-console:/home/admin# ipmitool chassis power cycle
Chassis Power Control: Cycle
11, 32, 15, 00068001, 19, 00068000,


BIOS Boot Selector for S5200
Version 3.40.0.9-15


POST Configuration
CPU Signature 506F1
CPU FamilyID=6, Model=5F, SteppingId=1, Processor=0
Microcode Revision 38
Platform ID: 0x0
PMG_CST_CFG_CTL: 0x37
Misc EN: 0x840089
Gen PM ConA: 0xA0800200
Therm Status: 0x8000000
POST Control=0xEA000301, Status=0xE604FF00

BIOS initializations...

CPGC Memtest Channel 0 ......................
    
     
    
    
    11. 
   
  11. Bekræft PCIe-firmwareversionen efter opgraderingen, skriv: sudo hshell -c 'pciephy fw version'.
    
    
     Eksempel på output: 
     
    0:soc_flash_init: Flash supported ID = 0x20
PCIe FW loader version: 2.6
PCIe FW version: D102_0A
    
    
    12. 
  

                
Additional Information

        
Se hele vejledningen til Dell PowerFlex-enhed med PowerFlex 4.x | Dell USA 




        

        
        
Affected Products

        ScaleIO







                        

                            

    

        

            

                
                    
 Article Properties

                
            

            

                

                        
Article Number: 000315118

                

                
                

                        
Article Type: How To

                

                

                        
Last Modified: 30 أبريل 2025


                

                    

                            
Version:  1

                    


            


        

    

    

        

            

                
                    
Find answers to your questions from other Dell users

                
            

            

                

                    
                



            


        

    

    

        

            

                
                    
Support Services

                
            

            

                

                    Check if your device is covered by Support Services.