Não é possível ativar a recuperação automática de RDFA
Summary: A recuperação automática do SRDF/A não pode ser habilitada.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
O recurso de recuperação automática do RDFA é ativado por padrão para novos grupos do SRDF a partir do código Magnolia (10.2). Você pode desabilitar esse recurso para um RDFG usando o comando:
symrdf -sid xxxx -rdfg ## set rdfa -autostart off
Depois que esse recurso for desativado, o comando para ativá-lo novamente não parecerá funcionar. Por exemplo:
C:\>symrdf -sid xxxx -rdfg 15 set rdfa -autostart on -nop
An RDF Set 'Attributes' operation execution is in
progress for RDF group 15. Please wait...
SRDF/A Set Autostart (xxxx,0015).................................Started.
SRDF/A Set Autostart (xxxx,0015).................................Done.
The RDF Set 'Attributes' operation successfully executed
for RDF group 15.
C:\>symrdf -sid 06 query -rdfg 15 -rdfa
Symmetrix ID : 00022000xxxx (Microcode Version: 6079)
RDFA Session Number : 14
RDFA Cycle Number : 703212
RDFA Session Status : Active - DSE
RDFA Consistency Exempt Devices : No
RDFA Auto-recovery : Disabled
RDFA Minimum Cycle Time : 00:00:05
RDFA Avg Cycle Time : 00:00:05
RDFA Avg Transmit Cycle Time : 00:00:05
Transmit Queue Depth on R1 Side : 1
Tracks not Committed to the R2 Side: 0
Time that R2 is behind R1 : 00:00:07
R2 Image Capture Time : Tue Jul 22 22:18:40 2025
R2 Data is Consistent : True
RDFA R1 Side Percent Cache In Use : 0
RDFA R2 Side Percent Cache In Use : 0
R1 Side DSE Used Tracks : 0
R2 Side DSE Used Tracks : 0
R1 Side Shared Tracks : 0
Transmit Idle Time : 00:00:00
Remote Symmetrix ID : 00022000yyyy (Microcode Version: 6079)
RDF (RA) Group Number : 15 (0E)
Target (R2) View Source (R1) View FLAGS
--------------------------------- ------------------------ ----- ------------
ST LI ST
Standard A N A
Logical Sym T R1 Inv R2 Inv K Sym T R1 Inv R2 Inv RDF Pair
Device Dev E Tracks Tracks S Dev E Tracks Tracks MCES STATE
--------------------------------- -- ------------------------ ----- ------------
N/A 003FA WD 0 0 RW 004FE RW 0 0 AX.E Consistent
Total ------- ------- ------- -------
Track(s) 0 0 0 0
MB(s) 0.0 0.0 0.0 0.0Cause
Esse é o comportamento esperado. Depois que esse recurso for desativado, ele só poderá ser reabilitado reiniciando a sessão do SRDF/A. A recuperação automática permanece inativa até que a sessão do SRDF/A seja reiniciada, mesmo quando a inicialização automática está ativada. Portanto, você deve suspender e, em seguida, retomar a replicação para ver essa alteração de valor para o grupo.
Resolution
Solução temporária: Você pode reativar o recurso de recuperação automática RDFA usando o comando:
symrdf -sid xxxx -rdfg 15 set rdfa -autostart on -nop
Depois que isso for habilitado, você deverá suspender e, em seguida, retomar a replicação para reiniciar o recurso de recuperação automática para esse grupo do SRDF:
C:\>symrdf -sid xxxx -f rdfg15.txt -rdfg 15 suspend -nop An RDF 'Suspend' operation execution is in progress for device file 'rdfg15.txt'. Please wait... Suspend RDF link(s) for device(s) in (xxxx,0015).................Started. Suspend RDF link(s) for device(s) in (xxxx,0015).................Done. The RDF 'Suspend' operation successfully executed for device file 'rdfg15.txt'. C:\>symrdf -sid xxxx -f rdfg15.txt -rdfg 15 establish -nop An RDF 'Incremental Establish' operation execution is in progress for device file 'rdfg15.txt'. Please wait... Suspend RDF link(s) for device(s) in (xxxx,0015).................Done. Resume RDF link(s) for device(s) in (xxxx,0015)..................Started. Resume RDF link(s) for device(s) in (2206,0015)..................Done. The RDF 'Incremental Establish' operation successfully initiated for device file 'rdfg15.txt'.
Agora, quando você consulta o grupo, ele mostra que a recuperação automática de RDFA está habilitada:
C:\>symrdf -sid xxxx -f rdfg15.txt -rdfg 15 que -rdfa
Symmetrix ID : 00022000xxxx (Microcode Version: 6079)
RDFA Session Number : 14
RDFA Cycle Number : 2
RDFA Session Status : Active - DSE
RDFA Consistency Exempt Devices : No
RDFA Auto-recovery : Enabled - Inactive
RDFA Minimum Cycle Time : 00:00:05
RDFA Avg Cycle Time : 00:00:05
RDFA Avg Transmit Cycle Time : 00:00:00
Transmit Queue Depth on R1 Side : 1
Tracks not Committed to the R2 Side: 0
Time that R2 is behind R1 : 00:00:03
R2 Image Capture Time : Wed Jul 23 22:16:37 2025
R2 Data is Consistent : True
RDFA R1 Side Percent Cache In Use : 0
RDFA R2 Side Percent Cache In Use : 0
R1 Side DSE Used Tracks : 0
R2 Side DSE Used Tracks : 0
R1 Side Shared Tracks : 0
Transmit Idle Time : 00:00:00
Remote Symmetrix ID : 00022000yyyy (Microcode Version: 6079)
RDF (RA) Group Number : 15 (0E)
Target (R2) View Source (R1) View FLAGS
--------------------------------- ------------------------ ----- ------------
ST LI ST
Standard A N A
Logical Sym T R1 Inv R2 Inv K Sym T R1 Inv R2 Inv RDF Pair
Device Dev E Tracks Tracks S Dev E Tracks Tracks MCES STATE
--------------------------------- -- ------------------------ ----- ------------
N/A 003FA WD 0 0 RW 004FE RW 0 0 A..E Consistent
Total ------- ------- ------- -------
Track(s) 0 0 0 0
MB(s) 0.0 0.0 0.0 0.0
Products
Solutions EnablerArticle Properties
Article Number: 000348361
Article Type: Solution
Last Modified: 25 نوفمبر 2025
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.