NetWorker:ソースが破損しているにもかかわらず、クローン作成されたセーブセットが誤って有効としてマークされる

Summary: 影響を受けるNetWorkerバージョンでは、クローン操作が失敗してログにエラーが報告されても、破損したセーブセットがクローン作成後に誤って有効としてマークされることがあります。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

  • A saveset バックアップ中に有効だったものは、後で破損します。
  • 破損したのクローン作成 saveset エラーで完了するが、クローンとしてマークされる saveset メディア データベースで有効な場合。
  • 影響を受けるNetWorkerバージョンは、19.6.x19.7.x9.8.xおよび19.9.0.4より前のバージョンです。
  • nsrclone 失敗を報告するが、 mminfo クローニングされた saveset 有効なフラグ付き。

Example:

root@server:#  mminfo -q ssid=2557547202 -r "clonetime(22),sscreate(22),volume,pool,totalsize(2),sumflags,clflags,name"
      clone time            ss created      volume         pool        total fl clflg name
11/13/2022 04:52:34 PM 11/13/2022 04:52:34 PM VM040089     DUMPS_5WKS 31 GB cb  RMAN:HOT_F_DB_name_1.rman  <=== Backup valid but corrupted data
  • の開始 nsrclone 堕落した者の saveset
root@server:# nsrclone -D9 -v -s nsr_server -b CLONE_5WKS -S 2557547202 >> clone_log.txt 2>&1 ; echo $?
1   <=== An error is correctly reported from the nsrclone command
  • NetWorkerクローン出力ログは、 saveset 無効として
root@server:/$ tail -50 clone_log.txt
      forced volume location: SN_name;
          inactivity timeout: 180;
                      job id: 1104237;
                      manual: Yes;
               NSR operation: cloning;
                   save sets: \
...
11/22/22 17:29:08.948529 start_regular_clone for Regular type failed: Unable to start clone session: other clones exist for failed save set RMAN:HOT_F_DB_name_1.rman ssid=2557547202
 11/22/22 17:29:08.948586 Exiting process_this_snode for Regular clone
11/22/22 17:29:08.948603 Function for Regular clone returned: Unable to start clone session: other clones exist for failed save set RMAN:HOT_F_DB_name_1.rman ssid=2557547202
 162560:nsrclone: Unable to start clone session: other clones exist for failed save set RMAN:HOT_F_DB_name_1.rman ssid=2557547202
...
198620:nsrclone: Some of the clones failed
198620:nsrclone: Some of the clones failed
11/22/22 17:29:08.953903 alldone(): ENTER
...
         completion severity: 50;
           completion status: failed;
...
11/22/22 17:29:08.954582 nsrclone, alldone(): EXIT
  • Daemon.log NetWorkerサーバーからエラーが報告されます。
181147 11/22/2022 05:29:08 PM  ansrd NSR critical Unable to clone save sets for nsr_prd: other clones exist for failed save set RMAN:HOT_F_DB_name_1.rman ssid=2557547202
71193 11/22/2022 05:29:08 PM  nsrd NSR info Error Alert: Clone operation failed with error: 'Some of the clones failed'.
  • Daemon.raw ストレージ ノードからエラーが報告されます。
198625 22/11/2022 5:29:04 PM  2 0 11 2180355872 29752 0 SN_name nsrmmd#43 NSR warning Reading volume 'VM040089' failed: 'Bad file descriptor' ^M
198625 22/11/2022 5:29:08 PM  2 0 11 2180355872 29752 0 SN_name nsrmmd#43 NSR warning Reading volume 'VM040089' failed: 'Bad file descriptor' ^M
  • クローンが完了すると、 saveset ファイルに指定する必要があります。
root@server:/# mminfo -q ssid=2557547202 -r "clonetime(22),sscreate(22),volume,pool,totalsize(2),sumflags,clflags,name"
      clone time            ss created      volume         pool        total fl clflg name
11/22/2022 05:13:30 PM 11/13/2022 04:52:34 PM VC00500U     CLONE_DUMPS_5WKS 31 GB hb  RMAN:HOT_F_DB_name_1.rman  <= Clone is considered as VALID
11/22/2022 05:13:30 PM 11/13/2022 04:52:34 PM VC0250BO     CLONE_DUMPS_5WKS 31 GB tb  RMAN:HOT_F_DB_name_1.rman     <= Clone is considered as VALID
11/13/2022 04:52:34 PM 11/13/2022 04:52:34 PM VM040089     DUMPS_CIBOS_5WKS 31 GB cb s RMAN:HOT_F_DB_name_1.rman     <= saveset source has been newly set as suspect

Cause

NetWorkerがクローンとして誤ってマークされる saveset ソースが saveset が破損しているため、クローン操作は失敗します。この動作は、クローン検証ロジックの欠陥によるものです。

Resolution

この問題は、次のNetWorkerバージョンに修正されています。

  • 19.9.0.5
  • 19.10.0.2
  • 19.11.xより後のすべてのバージョン

上記のいずれかのバージョンにアップグレードして、破損していることを確認します savesets は、クローニング中に無効として正しくマークされます。

Products

NetWorker Family
Article Properties
Article Number: 000379427
Article Type: Solution
Last Modified: 17 ديسمبر 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.