DSA-2026-223: Security Update for Dell Enterprise Sonic Distribution Copy Fail (CVE-2026-31431) and Dirty Frag (CVE-2026-43284, CVE-2026-43500) 

Summary: Dell Enterprise Sonic Distribution mitigation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Impact

High

Additional Details

Customers who create users only via the CLI are not affected by these vulnerabilities as the non-privileged users do not have shell access.

Details

Third-party Component CVEs More Information
Linux Kernel CVE-2026-31431, CVE-2026-43284, CVE-2026-43500 https://nvd.nist.gov/vuln/searchThis hyperlink is taking you to a website outside of Dell Technologies.

 

Dell Technologies recommends all customers consider both the CVSS base score and any relevant temporal and environmental scores that may impact the potential severity associated with a particular security vulnerability.

Affected Products & Remediation

Product Affected Versions Remediated Versions Link
Dell Enterprise SONiC Distribution Versions prior to 4.5.3 Version 4.5.3 Link to update

 

Product Affected Versions Remediated Versions Link
Dell Enterprise SONiC Distribution Versions prior to 4.5.3 Version 4.5.3 Link to update

 

The Affected Products and Remediation table above may not be a comprehensive list of all affected supported versions and may be updated as more information becomes available.

Workarounds & Mitigations

CVE ID Workaround and Mitigation
CVE-2026-31431, CVE-2026-43284, CVE-2026-43500

For customers who configure general Linux shell access or want to implement defense-in-depth measures, we recommend adding an additional filter to block dynamic loading of the affected modules.

1) Disable Vulnerable Kernel Module Loading

From the Linux shell as system admin add the following filter to your system configuration:

#Restrict loading of the affected kernel modules

echo "install algif_aead /bin/false" | sudo tee /etc/modprobe.d/disable-algif.conf

echo "install esp4 /bin/false" | sudo tee /etc/modprobe.d/disable-esp4.conf

echo "install rxrpc /bin/false" | sudo tee /etc/modprobe.d/disable-rxrpc.conf

If OSPFv3 IPSec authentication is not in use, apply the additional filter below as well:

echo "install esp6 /bin/false" | sudo tee /etc/modprobe.d/disable-esp6.conf

After applying the configuration, update module preferences:

sudo depmod -a

2) Verification

To verify the module is blocked:

#Check if any of the modules are active

lsmod | grep -E 'algif_aead|rxrpc|esp4|esp6'

#If necessary, unload the module if it is currently loaded

sudo modprobe -r <module_name>

#Attempt to load each module (should fail)

sudo modprobe algif_aead

#Expected output: modprobe: ERROR: ../libkmod/libkmod-module.c:1047 command_do() Error running install command '/bin/false' for module algif_aead: retcode 1

Persistence

The configuration will persist across system reboots. No additional steps are required.

 

Revision History

RevisionDateDescription
1.02026-05-15Initial Release
2.02026-05-15Formatting changes only.  No changes to content.  
3.02026-06-10Link provided for the 4.5.3 release

 

Related Information

Affected Products

Enterprise SONiC Distribution, PowerSwitch E3200-ON Series, PowerSwitch S3248T-ON, PowerSwitch S4348F/S4348T-ON, PowerSwitch S5212F-ON, PowerSwitch S5224F-ON, PowerSwitch S5232F-ON, PowerSwitch S5248F-ON, PowerSwitch S5296F-ON, PowerSwitch S5448F-ON , PowerSwitch Z9264F-ON, PowerSwitch Z9332F-ON, PowerSwitch Z9432F-ON, PowerSwitch Z9664F-ON, PowerSwitch Z9864F-ON ...
Article Properties
Article Number: 000465379
Article Type: Dell Security Advisory
Last Modified: 10 يونيو 2026
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.