PowerFlex: Resource Group (RG) displayed incorrect switch mapping during the upgrade.
Summary: This article explains how to fix RG displayed incorrect switch mapping during the upgrade.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
RG port details showed switches 2 and 3 instead of the correct switches 4 and 5, causing MTU warnings
Cause
The PowerFlex Manager service retained outdated NIC cabling data, causing it to reference the wrong switches in the RG mapping
Resolution
Applied the corrective steps in article PowerFlex: Deployment Fails -Network Configuration Mismatch - interfaces are connected to the same switch to purge the stale NIC cabling data, which refreshed the RG mapping and correctly displayed switches 4 and 5
Affected Products
PowerFlex rack, ScaleIOArticle Properties
Article Number: 000492472
Article Type: Solution
Last Modified: 28 يوليو 2026
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.