Dell Unity: Sådan opsætter du ESRS integreret ved hjælp af CLI

Denne KB er beregnet til at gennemgå de trin, der er nødvendige for at konfigurere og klargøre ESRS integreret på et Unity-system ved hjælp af CLI.

Trin 1: Angiv kontaktoplysninger
Følgende kommando bruges til at vise og indstille kontaktoplysningerne.

uemcli -u local/admin -securepassword /sys/info show

uemcli -u local/admin -securepassword /sys/info set -contactFirstName <First> -contactLastName <Last> -contactEmail <Email> -contactPhone <Phone#>

Trin 2: Bekræft EMC Online Support-kontoen.
Følgende kommandoer bruges til at vise og indstille den EMC Online Support-konto, der bruges til at registrere Unity-systemet.

uemcli -u local/admin -securepassword /sys/support/account show

uemcli -u local/admin -securepassword /sys/support/account set -user <EMC Online Support account> -passwdSecure <pass>

Trin 3: Tjek slutbrugerlicensaftalen.
Følgende kommandoer bruges til at vise og acceptere EULA-licensen.

uemcli -u local/admin -securepassword /sys/support/esrsi show

uemcli -u local/admin -securepassword /sys/support/esrsi set -acceptEula yes   (***If not already accepted***)

Trin 4: Kør networkCheck for ESRS.

uemcli -u local/admin -securepassword /sys/support/esrsi checkNetwork

Trin 5: Anmod om adgangskode
Følgende kommando bruges til at anmode om en adgangskode fra support.emc.com. Denne adgangskode sendes til e-mailen for EMC Online Support-kontoen, der er angivet i trin 2.

uemcli -u local/admin -securepassword /sys/support/esrsi requestAccessCode

Trin 6: Få vist webstedets oplysninger.
Følgende kommando bruges til at få vist og bekræfte et eller flere websites, som din konto har adgang til.

uemcli -u local/admin -securepassword /sys/support/esrsi/site show -accessCode <code> -detail

Trin 7: Aktivér ESRS på SiteId.
Følgende kommando er det sidste trin, hvor du kan aktivere ESRS for systemet ved hjælp af websteds-id'et fra trin 6. Hvis der returneres flere lokaliteter i trin 6, skal du sikre dig, at den korrekte lokalitet er angivet.

uemcli -u local/admin -securepassword /sys/support/esrsi set -enable yes -siteId <siteid>

Kommandoudgange fra CLI

 13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info show
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Contact first name    =
      Contact last name     =
      Contact company       =
      Contact email address =
      Contact phone number  =
      Location name         =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info set -contactFirstName John -contactLastName Doe -contactEmail Globe@myCompany.com -contactPhone 1234567890

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Support user name =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account set -user Globe@myCompany.com -passwdSecure

Password:
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Enabled       = no
      EULA accepted = no

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -acceptEula yes

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:00:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi checkNetwork

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:14:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi requestAccessCode

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Recipient email address =  G*****@myCompany.com.

Operation completed successfully.

21:15:22 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi/site show -accessCode 123456 -detail

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Site ID          = 123456
      Party ID         = 987654321
      Site name        = My Company
      Site description =
      Address          = 123 My Address
      State            = MA
      Country          = US
      Country name     =
      City             = Hopkinton
      Current location = yes

21:20:46 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -enable yes -siteId 123456

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.