Dell Unity: How To setup ESRS Integrated using CLI

This KB is intended to walk through the steps necessary to configure and provision ESRS Integrated on a Unity array using CLI.

Step 1: Set Contact Information
The following command is used to show and set the contact information.

uemcli -u local/admin -securepassword /sys/info show

uemcli -u local/admin -securepassword /sys/info set -contactFirstName <First> -contactLastName <Last> -contactEmail <Email> -contactPhone <Phone#>

Step 2: Verify the EMC Online Support Account.
The following commands are used to show and set the EMC Online Support Account that is used to register the Unity array.

uemcli -u local/admin -securepassword /sys/support/account show

uemcli -u local/admin -securepassword /sys/support/account set -user <EMC Online Support account> -passwdSecure <pass>

Step 3: Check EULA.
The following commands are used to show and accept the EULA License.

uemcli -u local/admin -securepassword /sys/support/esrsi show

uemcli -u local/admin -securepassword /sys/support/esrsi set -acceptEula yes   (***If not already accepted***)

Step 4: Run the networkCheck for ESRS.

uemcli -u local/admin -securepassword /sys/support/esrsi checkNetwork

Step 5: request AccessCode
The following command is used to request an AccessCode from support.emc.com. This AccessCode is sent to the EMC Online Support Account Email specified in Step 2.

uemcli -u local/admin -securepassword /sys/support/esrsi requestAccessCode

Step 6: View the Site Information.
The following command is used to view and verify one or more sites that your account has access to.

uemcli -u local/admin -securepassword /sys/support/esrsi/site show -accessCode <code> -detail

Step 7: Enable ESRS on SiteId.
The following command is the last step in which you can enable ESRS for the Array using the Site ID from Step 6. If multiple Sites are returned in Step 6, ensure that the correct site is specified.

uemcli -u local/admin -securepassword /sys/support/esrsi set -enable yes -siteId <siteid>

Command outputs from CLI

 13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info show
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Contact first name    =
      Contact last name     =
      Contact company       =
      Contact email address =
      Contact phone number  =
      Location name         =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info set -contactFirstName John -contactLastName Doe -contactEmail Globe@myCompany.com -contactPhone 1234567890

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Support user name =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account set -user Globe@myCompany.com -passwdSecure

Password:
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Enabled       = no
      EULA accepted = no

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -acceptEula yes

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:00:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi checkNetwork

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:14:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi requestAccessCode

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Recipient email address =  G*****@myCompany.com.

Operation completed successfully.

21:15:22 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi/site show -accessCode 123456 -detail

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Site ID          = 123456
      Party ID         = 987654321
      Site name        = My Company
      Site description =
      Address          = 123 My Address
      State            = MA
      Country          = US
      Country name     =
      City             = Hopkinton
      Current location = yes

21:20:46 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -enable yes -siteId 123456

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.