Basic Simple Network Management Protocol (SNMP) configuration on Dell EMC Networking X series switches

Zusammenfassung: This article explains the basic SNMP configuration on Dell X series switches.

Weisungen

Betroffene Produkte

Dieser Artikel gilt für Dieser Artikel gilt nicht für Dieser Artikel ist nicht an ein bestimmtes Produkt gebunden. In diesem Artikel werden nicht alle Produktversionen aufgeführt.

Andere Ressourcen ansehen

Weisungen

Log in to Dell X series switch using web browser
Navigate to Network Administration and select SNMP Monitoring.
In SNMP monitoring, navigate to Global Parameters and then click Edit.
Click the gear icon. For Local Engine ID Type, select Default and choose Enabled for all items then confirm > OK.
Click the gear icon again. Copy the Engine ID to your clipboard and press Cancel.
Click Add on edit global parameters, for Supported IP Format, select IPv4. For IP Address, enter the IP address of the SNMP server. For Local Engine ID, paste the Engine ID from your clipboard. Confirm > OK.
Navigate to SNMP Monitoring > Communities. Edit communities and then Add.
For Supported IP Format, select IPv4. For SNMP Management Station, choose All. Enter a community string in Community String.
Select Basic for the Access Mode. Select Read-Only and set the View Name as Default. Confirm > OK.

Note: We can choose the SNMP community string to be public or private. If you use a community string other than public or private, add it to the SNMP server.
Save the running configuration to startup configuration.