VPLEX: Jak utworzyć wolumin wirtualny
Zusammenfassung: W tym artykule bazy wiedzy opisano kroki potrzebne do utworzenia woluminu wirtualnego.
Dieser Artikel gilt für
Dieser Artikel gilt nicht für
Dieser Artikel ist nicht an ein bestimmtes Produkt gebunden.
In diesem Artikel werden nicht alle Produktversionen aufgeführt.
Weisungen
- Sprawdź, czy nie ma zajętych woluminów pamięci masowej:
VPlexcli:/> ll **/storage-volumes
/clusters/cluster-1/storage-elements/storage-volumes:
Name VPD83 ID Capacity Use Vendor IO Type Thin Provision
---------------------------------------- ---------------------------------------- -------- --------- ------ Status ----------- Rebuild Type
---------------------------------------- ---------------------------------------- -------- --------- ------ ------ ----------- ------- ---------
ESX_4 VPD83T3:6006048000028746073753594d303143 8.43G used EMC alive normal true legacy
Symm0737_0001 VPD83T3:6006048000028746073753594d303031 8.43G used EMC alive normal true legacy
Symm0737_001B VPD83T3:6006048000028746073753594d303142 8.43G claimed EMC alive normal true legacy
Symm0737_001D VPD83T3:6006048000028746073753594d303144 8.43G claimed EMC alive normal true legacy
Test VPD83T3:6006048000028746073753594d303041 8.43G claimed EMC alive normal true legacy
VPD83T3:6006048000028746073753594d303035 VPD83T3:6006048000028746073753594d303035 8.43G unclaimed EMC alive traditional false legacy
- Zajmij żądany wolumin pamięci masowej:
VPlexcli:/> storage-volume claim --name testA -d VPD83T3:6006048000028746073753594d303035/
Claimed 1 of 1 storage-volumes.
- Upewnij się, że przywłaszczenie woluminu pamięci masowej powiodło się:
VPlexcli:/> ll /clusters/cluster-1/storage-elements/storage-volumes
/clusters/cluster-1/storage-elements/storage-volumes:
Name VPD83 ID Capacity Use Vendor IO Type Thin Provision
---------------------------------------- ---------------------------------------- -------- --------- ------ Status ----------- Rebuild Type
---------------------------------------- ---------------------------------------- -------- --------- ------ ------ ----------- ------- ---------
ESX_4 VPD83T3:6006048000028746073753594d303143 8.43G used EMC alive normal true legacy
Symm0737_0001 VPD83T3:6006048000028746073753594d303031 8.43G used EMC alive normal true legacy
Symm0737_001B VPD83T3:6006048000028746073753594d303142 8.43G claimed EMC alive normal true legacy
Symm0737_001D VPD83T3:6006048000028746073753594d303144 8.43G claimed EMC alive normal true legacy
Test VPD83T3:6006048000028746073753594d303045 8.43G claimed EMC alive normal true legacy
testA VPD83T3:6006048000028746073753594d303035 8.43G claimed EMC alive normal false legacy
- Utwórz zasięg z dostępnych zajętych woluminów pamięci masowej:
VPlexcli:/> extent create testA,Test
- Potwierdź pomyślnie utworzony zakres:
VPlexcli:/> ll /clusters/cluster-1/storage-elements/extents
/clusters/cluster-1/storage-elements/extents:
Name StorageVolume Capacity Use
------------------------------------------------ ------------------ -------- -------
extent_Test_1 Test 8.43G claimed
extent_testA_1 testA 8.43G claimed
- Utwórz urządzenie lokalne:
VPlexcli:/> local-device create --name testA_vol --geometry raid-1 --extents /clusters/cluster-1/storage-elements/extents/extent_testA_1,/clusters/cluster-1/storage-elements/extents/extent_Test_1 --force
- Potwierdź, że utworzono urządzenie lokalne:
VPlexcli:/> ll -p **/devices
/clusters/cluster-1/devices:
Name Operational Health Block Block Capacity Geometry Visibility Transfer Virtual Volume
---------------------- Status State Count Size -------- -------- ---------- Size --------------------------
---------------------- ----------- ------ ------- ----- -------- -------- ---------- -------- --------------------------
testA_vol ok ok 2209680 4K 8.43G raid-1 local 128K -
VPlexcli:/> show-use-hierarchy /clusters/cluster-1/devices/testA_vol/
local-device: testA_vol (8.43G, raid-1, cluster-1)
extent: extent_Test_1 (8.43G)
storage-volume: Test (8.43G)
logical-unit: VPD83T3:6006048000028746073753594d303045
storage-array: EMC-SYMMETRIX-287460737
extent: extent_testA_1 (8.43G)
storage-volume: testA (8.43G)
logical-unit: VPD83T3:6006048000028746073753594d303035
storage-array: EMC-SYMMETRIX-287460737
- Tworzenie woluminu wirtualnego:
VPlexcli:/> virtual-volume create -r testA_vol
- Upewnij się, że wolumin wirtualny został utworzony pomyślnie:
VPlexcli:/> ll **/virtual-volumes
/clusters/cluster-1/virtual-volumes:
Name Operational Health Service Block Block Capacity Locality Supporting Device Cache Mode Expandable Expandable Consistency VPD ID
-------------------------- Status State Status Count Size -------- -------- ---------------------- ----------- ---------- Capacity Group ----------------------------------------
-------------------------- ----------- ------ ---------- ------- ----- -------- -------- ---------------------- ----------- ---------- ---------- ----------- ----------------------------------------
testA_vol_vol ok ok unexported 2209680 4K 8.43G local testA_vol synchronous true 0B - VPD83T3:6000144000000010b0026af0c08572c2
VPlexcli:/> show-use-hierarchy /clusters/cluster-1/devices/testA_vol/
virtual-volume: testA_vol_vol (8.43G, local @ cluster-1, unexported) <-----------
local-device: testA_vol (8.43G, raid-1, cluster-1)
extent: extent_Test_1 (8.43G)
storage-volume: Test (8.43G)
logical-unit: VPD83T3:6006048000028746073753594d303045
storage-array: EMC-SYMMETRIX-287460737
extent: extent_testA_1 (8.43G)
storage-volume: testA (8.43G)
logical-unit: VPD83T3:6006048000028746073753594d303035
storage-array: EMC-SYMMETRIX-287460737olumes
Wolumin wirtualny jest obecnie wyświetlany jako niewyeksportowany, ponieważ nie został dodany do widoku pamięci masowej.
- Sprawdź dostępne widoki pamięci masowej, aby dodać wolumin wirtualny do:
VPlexcli:/> ll **/storage-views
/clusters/cluster-1/exports/storage-views:
Name Operational initiator-ports virtual-volumes port name, enabled, export status
--------------- Status ---------------------------------- ------------------------------------------------------------------------------ ----------------------------------
--------------- ----------- ---------------------------------- ------------------------------------------------------------------------------ ----------------------------------
DELLPR510-F ok DELLPR510-F_HBA0 (0,device_Symm0737_0008_1_vol,VPD83T3:6000144000000010b0026af0c085706c,8.43G), P000000003CA00263-A0-FC02,true,ok,
(1,ESX_4_vol,VPD83T3:6000144000000010b0026af0c08570e5,16.9G), P000000003CA0026A-A0-FC00,true,ok,
(5,device_Symm0737_0007_1_vol,VPD83T3:6000144000000010b0026af0c0857071,8.43G) P000000003CB0026A-B1-FC00,true,ok
- Dodaj wolumin wirtualny do żądanego widoku pamięci masowej:
VPlexcli:/> export storage-view addvirtualvolume --view DELLPR510-F --virtual-volumes testA_vol_vol
- Potwierdź pomyślne utworzenie woluminu:
VPlexcli:/> show-use-hierarchy /clusters/cluster-1/devices/testA_vol/
storage-view: DELLPR510-F (cluster-1)
virtual-volume: testA_vol_vol (8.43G, local @ cluster-1, running)
local-device: testA_vol (8.43G, raid-1, cluster-1)
extent: extent_Test_1 (8.43G)
storage-volume: Test (8.43G)
logical-unit: VPD83T3:6006048000028746073753594d303045
storage-array: EMC-SYMMETRIX-287460737
extent: extent_testA_1 (8.43G)
storage-volume: testA (8.43G)
logical-unit: VPD83T3:6006048000028746073753594d303035
storage-array: EMC-SYMMETRIX-287460737
Betroffene Produkte
VPLEX SeriesProdukte
VPLEX Series, VPLEX VS1, VPLEX VS2, VPLEX VS6Artikeleigenschaften
Artikelnummer: 000158420
Artikeltyp: How To
Zuletzt geändert: 04 Mai 2026
Version: 6
Antworten auf Ihre Fragen erhalten Sie von anderen Dell NutzerInnen
Support Services
Prüfen Sie, ob Ihr Gerät durch Support Services abgedeckt ist.