Isilon PowerScale：重新製作映像程序失敗，並達到停止開機條件

為 Isilon 或 PowerScale 節點重建映像時，會顯示類似此訊息：
 

Unable to pull files from None backup
Installation config method is PSF: Unable to pull secondary backup files
Installation config method is PSF: Copying PSI config files
Unable to /sbin/mount /dev/mirror/mfg on /mfg
PSF file path /mfg/psi/psf.json unmounted primary backup; mount attempt failed
stop_boot condition reached, but OneFS install flag set. Aborting.
Failed to copy PSI config files: Chassis is missing a PSI receipt.
A receipt must be provided before the boot will be allowed to continue.
[: -ne: unexpected operator
eval: cannot create /opt/dell/srvadmin/iSM/etc/ini/software-package.ini: No such file or directory
eval: cannot create /opt/dell/srvadmin/iSM/etc/ini/software-package.ini: No such file or directory
eval: /opt/dell/srvadmin/iSM/bin/Invoke-iSMPKIHelper: not found
Starting background file system checks in 60 seconds.

Thu Mar 28 21:44:58 GMT 2024


Isilon OneFS/amd64 (isi-bsd) (ttyu0)



login:

使用 root 的使用者名稱和密碼登入作業系統，然後執行：
 

fsck -y -t ufs /dev/mirror/*

如果命令指示它已修復任何鏡像，請重新運行該命令。繼續重新運行該命令，直到鏡像報告沒有變化。

當鏡像標示為乾淨後，請為節點重新開機，重建映像程序應會完成。如果重建映像程序持續發生問題，請聯絡支援人員。