Dell Networking: O Sonic OS 4.4.0 introduz o modo individual LACP.

Zusammenfassung: As portas membros de port-channel dinâmicas que não recebem as LACPDUs de um dispositivo LAG par são marcadas como LACP inativas e não carregam nenhum tráfego de rede. No entanto, em determinados cenários, portas LACP inativas individuais ainda são necessárias para transportar o tráfego de rede {transmitir e receber}. Para permitir que portas LACP inativas transitem automaticamente para portas LACP que podem transportar tráfego de rede, ative o lacp individual no Port-Channel. ...

Dieser Artikel gilt für Dieser Artikel gilt nicht für Dieser Artikel ist nicht an ein bestimmtes Produkt gebunden. In diesem Artikel werden nicht alle Produktversionen aufgeführt.

Weisungen

Com o modo individual LACP ativado no Port-Channel, as portas LACP inativas são chamadas de portas individuais.

 

As portas individuais herdam as propriedades dinâmicas do Port-Channel habilitado para LACP, permitindo que o tráfego de rede flua através delas.

 

As portas LACP individuais herdam propriedades de VLAN, como associação de VLAN e marcação de VLAN, da configuração de port-channel.

 


Restrições individuais do LACP: 

 

  • O LACP individual só pode ser configurado pelas funções admin e secadmin.
  • O LACP Individual se aplica somente a port channels dinâmicos no modo Active.
  • LACP As portas individuais não herdam as configurações de STP, L3 e QoS do port-channel pai.

 

Habilite o LACP individual: 

Sonic(config)# interface PortChannel 100 mode active
Sonic(config-if-po100)# lacp individual

Sonic(config-if-po100)# show configuration
!
interface PortChannel100 mode active
 lacp individual
 no shutdown

 

Desative o LACP indivdual: 

Sonic(config)# interface PortChannel 100 mode active
Sonic(config-if-po100)# no lacp individual

Sonic(config-if-po100)# show configuration
!
interface PortChannel100 mode active
 no shutdown

 

Configure um tempo de espera excedido para o modo individual LACP: 

Sonic(config)# interface PortChannel 100 mode active
Sonic(config-if-po100)# lacp individual
Sonic(config-if-po100)# lacp individual timeout 60

Sonic(config-if-po100)# show configuration
!
interface PortChannel100 mode active
 lacp individual
 lacp individual timeout 60
 no shutdown

Default: Intervalo de 3 segundos
: 3 a 90 segundos

 

Remova o timeout individual do LACP configurado e retorne ao valor padrão de timeout: 

Sonic(config)# interface PortChannel 100 mode active

Sonic(config-if-po100)# show configuration
!
interface PortChannel100 mode active
 lacp individual
 lacp individual timeout 60
 no shutdown

Sonic(config-if-po100)# no lacp individual timeout

Sonic(config-if-po100)# show configuration
!
interface PortChannel100 mode active
 lacp individual
 no shutdown

 

Visualizar o status individual do LACP: 

Sonic# show interface PortChannel 100 | grep individual
LACP individual: Enabled
LACP individual timeout in seconds: 3

 

Nota: 

  • Se uma porta membro do Port-Channel aparecer {link UP} e não receber uma LACPDU para o período de tempo de espera excedido individual do LACP configurado, a porta fará a transição para o modo LACP individual.  
  • Se uma porta membro do Port-Channel, que é LACP ativa, não receber LACPDU para o tempo de espera excedido do LACP mais o período de tempo de espera excedido individual do LACP configurado, a porta fará a transição para o modo individual LACP.

 

Artikeleigenschaften
Artikelnummer: 000315610
Artikeltyp: How To
Zuletzt geändert: 02 Mai 2025
Version:  1
Antworten auf Ihre Fragen erhalten Sie von anderen Dell NutzerInnen
Support Services
Prüfen Sie, ob Ihr Gerät durch Support Services abgedeckt ist.