Dell Networking:Sonic OS 4.4.0 引入了 LACP 单独模式。

Zusammenfassung: 未从对等 LAG 设备接收 LACPDU 的动态端口通道成员端口标记为 LACP 非活动状态,不承载任何网络流量。 但是,在某些情况下,仍然需要各个非活动 LACP 端口来传输网络流量{传输和接收}。 要允许非活动 LACP 端口自动转换为可承载网络流量的 LACP 端口,请在端口通道上启用 lacp individual。

Dieser Artikel gilt für Dieser Artikel gilt nicht für Dieser Artikel ist nicht an ein bestimmtes Produkt gebunden. In diesem Artikel werden nicht alle Produktversionen aufgeführt.

Weisungen

在端口通道上启用 LACP 单独模式后,非活动 LACP 端口称为单独端口。

 

各个端口继承了启用 LACP 的端口通道的动态属性,从而允许网络流量流经它们。

 

LACP 各个端口从端口通道配置继承 VLAN 属性,例如 VLAN 成员身份和 VLAN 标记。

 


LACP 个人限制: 

 

  • LACP 个人只能由 admin 和 secadmin 角色配置。
  • LACP Individual 仅适用于主动模式下的动态端口通道。
  • LACP 个别端口不会从父端口通道继承 STP、L3 和 QoS 配置。

 

启用 LACP 单独: 

Sonic(config)# interface PortChannel 100 mode active
Sonic(config-if-po100)# lacp individual

Sonic(config-if-po100)# show configuration
!
interface PortChannel100 mode active
 lacp individual
 no shutdown

 

禁用 LACP 独立: 

Sonic(config)# interface PortChannel 100 mode active
Sonic(config-if-po100)# no lacp individual

Sonic(config-if-po100)# show configuration
!
interface PortChannel100 mode active
 no shutdown

 

为 LACP 单独模式配置超时: 

Sonic(config)# interface PortChannel 100 mode active
Sonic(config-if-po100)# lacp individual
Sonic(config-if-po100)# lacp individual timeout 60

Sonic(config-if-po100)# show configuration
!
interface PortChannel100 mode active
 lacp individual
 lacp individual timeout 60
 no shutdown

Default: 3 秒
范围:3-90 秒

 

删除已配置的 LACP 单独超时并返回到默认超时值: 

Sonic(config)# interface PortChannel 100 mode active

Sonic(config-if-po100)# show configuration
!
interface PortChannel100 mode active
 lacp individual
 lacp individual timeout 60
 no shutdown

Sonic(config-if-po100)# no lacp individual timeout

Sonic(config-if-po100)# show configuration
!
interface PortChannel100 mode active
 lacp individual
 no shutdown

 

查看 LACP 个人状态: 

Sonic# show interface PortChannel 100 | grep individual
LACP individual: Enabled
LACP individual timeout in seconds: 3

 

提醒: 

  • 如果端口通道成员端口接通 {link UP},并且在配置的 LACP 单独超时期限内未收到 LACPDU,则端口将转换为单个 LACP 模式。  
  • 如果处于 LACP 活动状态的端口通道成员端口在 LACP 超时加上配置的 LACP 单独超时期间未收到 LACPDU,则端口将转换为 LACP 单独模式。

 

Artikeleigenschaften
Artikelnummer: 000315610
Artikeltyp: How To
Zuletzt geändert: 02 Mai 2025
Version:  1
Antworten auf Ihre Fragen erhalten Sie von anderen Dell NutzerInnen
Support Services
Prüfen Sie, ob Ihr Gerät durch Support Services abgedeckt ist.