PowerFlex：未创建 CloudIQ 的性能捆绑包

Summary: 网关 （GW） 未为 CloudIQ 生成性能捆绑包，但配置、容量和警报按预期生成。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

当系统配置为发送 CloudIQ 特征和统计数据时，GW 会生成系统配置、系统容量、系统警报和系统性能统计数据。

默认情况下，无法手动停止创建四个捆绑包中的任何一个。

由于 GW 与 MDM 之间的 RestAPI 响应解释存在问题，因此无法收集卷统计信息并生成性能捆绑包。
有关数据收集和生成流程的更多信息，请参阅“其他信息”部分。

在 GW scaleio-trace.log文件中可以找到以下异常错误：

2022-08-05 12:05:53,975 [AsyncHandler-21] ERROR c.e.scaleio.esrsmanager.EsrsManager - Alert hasn't been sent since ESRS reached limit of 200 per: 8 hours
com.emc.scaleio.esrsmanager.NotificationMessageLimitException: null   <<<
    at com.emc.scaleio.esrsmanager.ESRSConnector.sendConnectEmcMessage(ESRSConnector.java:360) ~[ams-1.0-SNAPSHOT.jar:na]
    at com.emc.scaleio.esrsmanager.ESRSConnector.sendConnectEmcMessage(ESRSConnector.java:308) ~[ams-1.0-SNAPSHOT.jar:na]
    at com.emc.scaleio.esrsmanager.EsrsManager.sendAlert(EsrsManager.java:566) [ams-1.0-SNAPSHOT.jar:na]
    at com.emc.scaleio.esrsmanager.EsrsManager.sendAlert(EsrsManager.java:598) [ams-1.0-SNAPSHOT.jar:na]
    at com.emc.scaleio.esrsmanager.BaseNotificationManager.busReceivedAlerts(BaseNotificationManager.java:103) [ams-1.0-SNAPSHOT.jar:na]
...
2022-08-05 12:05:53,975 [https-jsse-nio-443-exec-293] ERROR c.e.s.s.r.DeviceRepositoryImpl - Error in QueryPropertiesResponse for Device::-101652817808130048 property:PENDING_MOVING_OUT_FWD_REBUILD_JOBS has value type: UNDEFINED_PROP_TYPE
2022-08-05 12:05:53,975 [https-jsse-nio-443-exec-293] ERROR c.e.s.s.r.DeviceRepositoryImpl - Error in QueryPropertiesResponse for Device::-101652817808130048 property:NET_THIN_USER_DATA_CAPACITY_IN_KB has value type: UNDEFINED_PROP_TYPE
...
2022-08-05 12:05:53,982 [https-jsse-nio-443-exec-306] ERROR c.e.s.s.r.DeviceRepositoryImpl - Error in QueryPropertiesResponse for Device::-99119590261981183 property:PENDING_MOVING_OUT_FWD_REBUILD_JOBS has value type: UNDEFINED_PROP_TYPE
2022-08-05 12:05:53,982 [https-jsse-nio-443-exec-290] ERROR c.e.s.s.r.DeviceRepositoryImpl - Error in QueryPropertiesResponse for Device::-99401056648822783 property:RFCACHE_WRITES_SKIPPED_STUCK_IO has value type: UNDEFINED_PROP_TYPE
2022-08-05 12:05:53,982 [https-jsse-nio-443-exec-310] ERROR c.e.s.s.w.c.ScaleIOController - Got an exception in handleException
java.lang.IllegalStateException: Bad number: 3   <<<
    at com.emc.s3g.scaleio.domain.enums.ScsiReserveType.valueOf(ScsiReserveType.java:42) ~[ams-1.0-SNAPSHOT.jar:na]
    at com.emc.s3g.scaleio.repository.BaseRepository.updateStatistics(BaseRepository.java:1184) ~[repository-1.0-SNAPSHOT.jar:na]
    at com.emc.s3g.scaleio.repository.BaseRepository.getStatistics(BaseRepository.java:981) ~[repository-1.0-SNAPSHOT.jar:na]
    at com.emc.s3g.scaleio.web.controller.ScaleIOController.getStatistics(ScaleIOController.java:93) ~[classes/:na]
    at sun.reflect.GeneratedMethodAccessor731.invoke(Unknown Source) ~[na:na]

工作系统示例：

root@working_cloudiq ~]# ls -lrt /opt/emc/scaleio/gateway/temp
total 300
drwx------. 2 root root 25 Feb 28 2020 certificates
drwx------. 2 root root 6 Feb 28 2020 scaleio-install-logs
-rwx------. 1 root root 0 Feb 28 2020 216e5abe-29e9-4825-b095-d8900d5964d8_ScaleIO-config.json
-rwx------. 1 root root 0 Jan 12 2022 safeToDelete.tmp
-rwx------. 1 root root 521 Jan 12 2022 index.html
-rwx------. 1 root root 0 Mar 20 01:36 GATEWAY_RUN_USER.txt
-rw-r-----. 1 root root 95929 Jul 14 08:33 powerflex_1657787617941_ELMSIO1234568_config.zip
-rw-r-----. 1 root root 47245 Jul 15 07:34 powerflex_1657870447081_ELMSIO1234568_capacity.zip
-rw-r-----. 1 root root 95935 Jul 15 08:33 powerflex_1657874022010_ELMSIO1234568_config.zip
-rw-r-----. 1 root root 47330 Jul 15 08:34 powerflex_1657874048125_ELMSIO1234568_capacity.zip
-rw-r-----. 1 root root 2671 Jul 15 09:02 powerflex_1657875734080_ELMSIO1234568_alerts.zip
-rw-r-----. 1 root root 2671 Jul 15 09:02 powerflex_1657875734085_ELMSIO1017KPF3_performance.zip   <<<
-rw-r-----. 1 root root 2670 Jul 15 09:07 powerflex_1657876034745_ELMSIO1234568_alerts.zip
-rw-r-----. 1 root root 2670 Jul 15 09:07 powerflex_1657876034750_ELMSIO1017KPF3_performance.zip   <<<

无法正常工作的系统示例 — 未生成performance.zip文件：

root@not_working_cloudiq ~]# ls -lrt /opt/emc/scaleio/gateway/temp
total 300
drwx------. 2 root root 25 Feb 28 2020 certificates
drwx------. 2 root root 6 Feb 28 2020 scaleio-install-logs
-rwx------. 1 root root 0 Feb 28 2020 216e5abe-29e9-4825-b095-d8900d5964d8_ScaleIO-config.json
-rwx------. 1 root root 0 Jan 12 2022 safeToDelete.tmp
-rwx------. 1 root root 521 Jan 12 2022 index.html
-rwx------. 1 root root 0 Mar 20 01:36 GATEWAY_RUN_USER.txt
-rw-r-----. 1 root root 95929 Jul 14 08:33 powerflex_1657787617941_ELMSIO1234568_config.zip
-rw-r-----. 1 root root 47245 Jul 15 07:34 powerflex_1657870447081_ELMSIO1234568_capacity.zip
-rw-r-----. 1 root root 95935 Jul 15 08:33 powerflex_1657874022010_ELMSIO1234568_config.zip
-rw-r-----. 1 root root 47330 Jul 15 08:34 powerflex_1657874048125_ELMSIO1234568_capacity.zip
-rw-r-----. 1 root root 2671 Jul 15 09:02 powerflex_1657875734080_ELMSIO1234568_alerts.zip
-rw-r-----. 1 root root 2670 Jul 15 09:07 powerflex_1657876034745_ELMSIO1234568_alerts.zip

Cause

PowerFlex 支持 SCSI-2 保留和 SCSI-3 保留命令的子集。SCSI 保留命令（重置、保留、释放、读取）由 SDC 发送到 MDM，然后由 MDM 更新 SDS。
在卷上放置 SCSI-3 保留后，RestAPI 会从 GW 调用到 MDM 以读取卷统计信息，然后会失败，并显示上面提到的错误 - Bad number：3.

GW 误解了 SCSI 保留类型，使从 MDM 返回的 RestAPI 调用失败。
PowerFlex 端的 I/O 和保留按预期工作。

如何在get_info中验证 SCSI 保留信息？

$ awk 'BEGIN { printf "%-15s %-15s %s\n", "Volume_ID", "Volume_Name", "SCSI_Reservation"; printf "%-15s %-15s %s\n", "---------", "-----------", "----------------" }; /: ID:/ { volume_id = $2; volume_name = $3 } / SCSI-reserver-key:/ { scsi_reserv = $1; if (scsi_reserv == "scsi2-reserved:3"){ printf "%-15s %-15s %-15s %s\n", volume_id, volume_name, scsi_reserv, "<<< SCSI-3 !!!" } else{ printf "%-15s %-15s %s\n", volume_id, volume_name, scsi_reserv } }' getInfoDump/mdm/sdbg_out.txt | column -t
Volume_ID                Volume_Name          SCSI_Reservation
---------                -----------          ----------------
ID:0x2fad5f7f00000000    Name:vol1-sp1-PD1    scsi2-reserved:0
ID:0x2fad5fcb00000001    Name:vol2-sp1-PD1    scsi2-reserved:3  <<<  SCSI-3  !!!
ID:0x2fad5fcc00000002    Name:vol3-sp1-PD1    scsi2-reserved:3  <<<  SCSI-3  !!!
ID:0x2fa9dd3d00000003    Name:vol4-sp1-PD1    scsi2-reserved:0

如何在实时系统上验证 SCSI 保留信息？

$ cat > script
c mdm
dumpallscreens
disconnect
exit
^D
$ /opt/emc/scaleio/sds/diag/sdbg script > sdbg_out.txt
$ awk 'BEGIN { printf "%-15s %-15s %s\n", "Volume_ID", "Volume_Name", "SCSI_Reservation"; printf "%-15s %-15s %s\n", "---------", "-----------", "----------------" }; /: ID:/ { volume_id = $2; volume_name = $3 } / SCSI-reserver-key:/ { scsi_reserv = $1; if (scsi_reserv == "scsi2-reserved:3"){ printf "%-15s %-15s %-15s %s\n", volume_id, volume_name, scsi_reserv, "<<< SCSI-3 !!!" } else{ printf "%-15s %-15s %s\n", volume_id, volume_name, scsi_reserv } }' sdbg_out.txt | column -t

Volume_ID                Volume_Name          SCSI_Reservation
---------                -----------          ----------------
ID:0x2fae49da00000001    Name:vol1-sp1-PD1    scsi2-reserved:0
ID:0x2fad5fcb00000002    Name:vol2-sp1-PD1    scsi2-reserved:3  <<<  SCSI-3  !!!
ID:0x2fad5fcc00000003    Name:vol3-sp1-PD1    scsi2-reserved:3  <<<  SCSI-3  !!!
ID:0x2fa9dd3d00000004    Name:vol4-sp1-PD1    scsi2-reserved:0

Resolution

由于 SCSI 预留由客户端和应用程序端设置，因此唯一的解决方法是从卷

中释放预留。受影响的版本

PowerFlex v3.5PowerFlex
v3.6PowerFlex
v4.0

已修复版本

PowerFlex v3.5.1.9
PowerFlex v3.6.1
PowerFlex v4.0.1.1

Additional Information

收集和创建性能捆绑包文件的流程包含两个单独的过程：

该  第一个流程  已激活  每 5 秒  从 MDM 发送统计信息请求，并以累积方式存储响应。

该  第二道工序  已激活  每 5 分钟  计算增量并将数据压缩到 /opt/emc/scaleio/gateway/temp 目录中的.zip文件中。

Affected Products

PowerFlex Appliance, PowerFlex custom node, PowerFlex Software
Article Properties
Article Number: 000208018
Article Type: Solution
Last Modified: 16 May 2026
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.