Data Domain:DD3300 显示未知磁盘且无警报
Summary: 在 Data Domain DD3300 数据保护专用存储设备上,您可能会注意到在运行磁盘状态命令时一个或多个磁盘报告为未知,即使未发布任何警报也是如此。此行为是预期行为,本文对此进行了说明。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
CLI 输出中显示未知磁盘,且没有任何活动警报
示例输出
# disk show state:
Disk Show State
-----------------
Dev 1 2 3 4 5 6 7 8
--- ------------------------
1-8 Y Y U U . . . .
--- ------------------------
Legend State Count
------ -------------- -----
. In Use Device 4
U Unknown Device 2
Y System Device 2
------ -------------- -----
Total 0 disks and 8 devs
Cause
DD3300 设备会保留某些磁盘用于 Cloud Tier 功能。如果未 激活 Cloud Tier,这些保留的磁盘在系统状态中显示为 未知 。
- 无法将保留的磁盘(通常为 1 TB)添加到活动层。
- 保留设备的数量取决于 DD3300 配置。
(来源:PowerProtect DD3300 硬件概述和安装指南)
保留的设备数量取决于 DD3300 配置。如下所示:
Resolution
- 这是 正常的系统行为。
- 未知磁盘为 Cloud Tier 保留并保持此状态,直至启用 Cloud Tier。
- 除非计划激活 Cloud Tier,否则无需执行任何作。
Affected Products
Data Domain, DD3300 ApplianceProducts
Data Domain, Data Domain Deduplication Storage SystemsArticle Properties
Article Number: 000060053
Article Type: Solution
Last Modified: 16 Dec 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.