如何在 Dell Security Management Server Virtual 中建立 FTP 使用者
Summary: 瞭解如何依照下列指示,在 Dell Security Management Server Virtual (先前稱為 Dell Data Protection Virtual Edition) 中建立檔案傳輸通訊協定使用者。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
本文涵蓋如何在 Dell Security Management Server Virtual (先前稱為 Dell Data Protection | Virtual Edition) 中建立檔案傳輸通訊協定 (FTP) 使用者。
受影響的產品:
- Dell Security Management Server Virtual
- Dell Data Protection | Virtual Edition
為 Dell Security Management Server Virtual 建立 FTP 使用者的程序會因版本而異。如需詳細資訊,請按一下適當的版本。如需版本控制資訊,請參閱 如何識別 Dell Data Security 伺服器版本。
- 使用預設系統管理員登入虛擬裝置 (
delluser) 憑據。
注意:- 虛擬裝置的預設登入資料為:
- 使用者名稱:
delluser - 密碼:
delluser
- 使用者名稱:
- 系統管理員可以變更在產品的虛擬裝置選單中的預設密碼。
- 虛擬裝置的預設登入資料為:
- 從主功能表中,選取基本組態,然後按下 Enter 鍵。

- 選取 SFTP,然後按下 Enter 鍵。

- 在選取新增使用者的情況下,填入使用者名稱和密碼。填入後,選取套用,然後按下 Enter 鍵。
注意:使用者名稱必須以小寫字母開頭,不能:- 包含大寫字母。
- 包含特殊字元 (_ 除外)。
- 超過 64 個字元。
密碼必須包含至少:
- 長度為 8 個字元,含:
- 一個大寫字母
- 一個小寫字母
- 一個數字
- 一個特殊字元 (!@#&%_-)
- 使用預設系統管理員登入虛擬裝置 (
ddpuser) 憑據。
注意:- 虛擬裝置的預設登入資料為:
- 使用者名稱:
ddpuser - 密碼:
ddpuser
- 使用者名稱:
- 系統管理員可以變更在產品的虛擬裝置選單中的預設密碼。
- 虛擬裝置的預設登入資料為:
- 從主功能表中,選取基本組態,然後按下 Enter 鍵。

- 選取檔案傳輸 (FTP) 使用者,然後按下 Enter 鍵。

- Dell Security Management Server Virtual 支援最多三個 FTP 使用者帳戶。按下 FTP 使用者 [編號] 狀態右側的空格鍵,以啟用該特定帳戶。對於任何啟用的 FTP 使用者,請建立使用者名稱和密碼。填入後,選取確定,然後按下 Enter 鍵儲存變更。
注意:密碼必須包含至少:- 長度為 8 個字元,含:
- 一個大寫字母
- 一個小寫字母
- 一個數字
- 長度為 8 個字元,含:
如要聯絡支援部門,請參閱 Dell Data Security 國際支援電話號碼。
請前往 TechDirect,以線上產生技術支援要求。
如需更多深入見解與資源,請加入 Dell 安全性社群論壇。
Additional Information
Videos
Affected Products
Dell EncryptionArticle Properties
Article Number: 000131898
Article Type: How To
Last Modified: 06 Sept 2024
Version: 10
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.