Article Number: 000120112
This article explains how to configure an IP address on Dell PowerConnect W-IAPs
The IAP is set to obtain an IP address thru DHCP by default out of the box.
In order to receive an IP address thru DHCP follow these steps:
The IAP will receive an IP address provided by the DHCP service running thru your switch or router.
In order to set static IP follow these steps:
Hit to stop autoboot: 0
apboot>
apboot> setenv ipaddr 192.0.2.1
apboot> setenv netmask 255.255.255.0
apboot> setenv gatewayip 192.0.2.2
apboot> save
Saving Environment to Flash...
Un-Protected 1 sectors
.done
Erased 1 sectors
Writing
apboot> printenv
The printenv displays the configuration that was saved in order to confirm the status.
W-IAP104/105, W-IAP108/109, W-IAP114/115, W-IAP134/135, W-IAP155/155P, W-IAP175P/AC, W-IAP204/205, W-IAP214/215, W-IAP224/225, W-IAP274/275, W-IAP3WN/P, W-IAP92/93
10 Apr 2021
3
How To