VxBlock: Cisco-problem CSCwh11744 – ACLTCAM-tjänsten rapporterar krasch- och omladdningsswitch

Summary: Cisco-problem CSCwh11744 – ACLTCAM-tjänsten rapporterar en krasch och läser in switchen igen.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Switch med NPIV-funktionen (N-Port Identifier Virtualization) aktiverad laddar om med ACLTCAM-krasch medan UP-portkanalen är ansluten till N-Port Virtualizer-switchen (NPV). 
show system reset-reason

----- reset reason for module 1 (from Supervisor in slot 1) ---
1) At 439618 usecs after Tue Aug 8 12:38:22 2023
Reason: Reset triggered due to HA policy of Reset
Service: acltcam hap reset
Version: 8.4(2e)

Cause

Känt problem med fast programvara 8.4(2e)

Resolution

Workaround:
För upp varje medlem i portkanalen en efter en.

Additional Information

Se Cisco CSCwh11744: Verktyget för sökning av problem (cisco.com) (extern länk) 

Affected Products

VxBlock System 1000
Article Properties
Article Number: 000221106
Article Type: Solution
Last Modified: 30 Dec 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.