The Surface Temperature of the Dell Ultrasharp Webcam WB7022 May Seem Warm

Summary: The following article provides information about why the surface temperature may seem warm on the Dell WB7022 webcam.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

The webcam surface temperature may seem warm during use

Note: The maximum temperatures only occur when the camera is recording.

UltraSharp Webcam

Cause

The running temperature of the webcam is from 40°c to 42°c. (104℉ to 110℉)

The webcam may seem warm to the touch, but it is not hot to the touch. It is well within approved safety standards and is safe to use.

Resolution

Depending on your sensitivity to temperature shifts, the webcam may seem warm or hot. However, the webcam’s operating temperature is well within approved safety standards.

If you are uncomfortable using the webcam, you can:

  1. Turn the webcam off.

  2. Disconnect the webcam from the host laptop, desktop, or monitor.

  3. Let the webcam cool down.

  4. Plug the webcam back and check it again.

As this is the standard running temperature, replacing with another WB7022 webcam makes no difference as they all have the same running temperature range.


Back to Top

Affected Products

Dell Webcam WB7022
Article Properties
Article Number: 000189900
Article Type: Solution
Last Modified: 11 May 2026
Version:  13
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.