VMware: De beveiligde ESXi-configuratie herstellen
Summary:Dit artikel bevat instructies over hoe de gebruiker de herstelsleutel invoert na vervanging van de systeemkaart of TPM op een ESXi-host.
Please select a product to check article relevancy
This article applies to This article does not apply toThis article is not tied to any specific product.Not all product versions are identified in this article.
Zorg ervoor dat de BIOS-configuratie correct is ingesteld voor TPM. Raadpleeg de gebruikershandleiding van de hardware.
Stappen:
Druk tijdens het opstarten van ESXi op SHIFT+O wanneer daarom wordt gevraagd (de letter O, niet het cijfer Nul/0):
Voeg het volgende toe aan de opstartconfiguratie met de herstelsleutel die is verzameld uit Vereisten:
OPMERKING: Als de iDRAC v9 of hoger is met een datacenterlicentie, is de klembordoptie virtuele console beschikbaar, waardoor de console eenvoudiger kan worden gekopieerd en geplakt.
encryptionRecoveryKey=customer-recovery-key-here
Druk op <ENTER> om op te starten in ESXi
SSH naar de host
Schrijf wijzigingen naar de schijf met het volgende:
[root@host1:~] /sbin/auto-backup.sh
Bootbank lock is /tmp/9f8acea1-504b6f07-568a-71c4e1a8ad0f.lck
Saving current state in /bootbank
Creating ConfigStore Backup
Locking esx.conf
Creating archive
Unlocked esx.conf
Using key ID 525ecf1a-d78f-3834-29aa-62600aee5fe4 to encrypt
Clock updated.
Time: 15:53:53 Date: 12/05/2023 UTC