GDDR: Fazer upgrade para o z/OS 2.5 faz com que os sistemas de controle GDDR e falhas sejam executados no modo degradado
Summary: O upgrade para o z/OS 2.5 causa falhas na reinicialização pós-desastre geograficamente dispersa (GDDR), e os sistemas de controle GDDR (C-SYS) são executados no modo degradado.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
O software operacional de mainframe é atualizado para o nível de software z/OS 2.5 com tolerância de manutenção. O z/OS 2.5 é usado para uma nova CPU IBM z16.
O GDDR GDDRMAIN foi iniciado com vários ABENDs após a aplicação da manutenção do z/OS:
- O HBM relata o erro abaixo na inicialização do GDDRMAIN, o host GDDR está no modo degradado:
ABEND S0E0-29
- O GDDRRPT relata o erro abaixo no desligamento do GDDRMAIN:
ABEND S0E0-28
As seguintes mensagens de erro são exibidas na saída do Monitor de eventos GDDR (EVM) e do Monitor de pulsação (HBM):
GDDUG86E No matching GDDR systems found
Se a solicitação do ABEND S0E0-28 ocorre no desligamento GDDRMAIN e, em seguida, um Abend S067-04 pode ocorrer se o GDDRMAIN for trazido de volta.
Cause
Uma
Além disso, um
ABEND S0E0-29 pode ocorrer na inicialização do GDDRMAIN na subtarefa HBM no módulo GDDREVMI, deslocamento 0005AF74.
PSW 183158F0 0010D507 3000F154Isso faz com que a subtarefa HBM seja encerrada e deixa o GDDRMAIN sem recursos de monitoramento de heartbeat. O host GDDR é executado no modo degradado. O GDDREVMI é atualizado para limpar o REGISTER AR15 antes de usar o registro para evitar um
ABEND S0E0-29.
Além disso, um
ABEND S0E0-28 pode ocorrer no GDDRRPT após o desligamento GDDRMAIN no GDDRMAIN, deslocamento 0006EAB2.
PSW D24FD37A 1000D207 D37D5004O GDDRRPT é atualizado para limpar REGISTER AR1 a fim de evitar uma
ABEND S0E0-28. O GDDRMAIN é atualizado para verificar se o espaço de dados 2 Access List Entry Token (ALET) é válido. Isso é feito antes de acessar o espaço de dados para outra instância do GDDR. Essa ação ajuda a evitar um Abend S067-04 na inicialização do GDDRMAIN devido a outra instância do GDDR não desligar corretamente.Resolution
Solução temporária:
- Nenhuma para ABEND S0E0-29, mas os hosts GDDR continuam sendo executados no modo degradado.
- Uma carga de programa inicial (IPL) da partição lógica (LPAR) é necessária para limpar a memória se um
Abend S067-04Ocorre.
Correção permanente:
- Para GDDR 6.0, GD60004 e GD60005 do Program Temporary Fix (PTF) estão disponíveis para download no Suporte Dell.
- Para o GDDR 6.1, o problema está resolvido no produto básico. Ele está disponível para download no Suporte Dell.
Additional Information
Descrição do PTF (Program Temporary Fix, Correção Temporária do Programa) -
++PTF(GD60004) REWORK(2022315) .
++VER(Z038) FMID(GDDR600)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3459
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: Warning message GDDUG24W results in
* RC 8 on pre-script and post-script
* configuration displays
*
* DESCRIPTION DETAIL:
*
* During GDDR scripts, warning message GDDUG24W could result
* in an RC 8 on the pre-script and post-script configuration
* displays, for example:
*
* GDDUG24W 2 external RDF groups indicate SRDF/A active
* GDDR639I GDDR Completed pre-script configuration display
* with rc 8
*
* This is simply a messaging issue, as a non-zero RC on the
* configuration displays does not affect the outcome of the
* script.
*
* PROBLEM RESOLUTION:
*
* Warning message GDDUG24W will now result in an RC 4 on the
* configuration displays, as expected.
*
* MODULES: GDDRMCMD
*
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3460 GDDR-3472
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: ABENDS067-04 upon GDDRMAIN startup due
* to another GDDR instance not shutting
* down cleanly
*
* DESCRIPTION DETAIL:
*
* An S067-04 abend could occur upon GDDRMAIN startup at
* GDDRMAIN offset 000006AC (data at PSW 4038B219 02009540
* 50E8B219) if another GDDR instance was not shut down
* cleanly. This causes GDDRMAIN to terminate.
*
* PROBLEM RESOLUTION:
*
* An S067-04 abend should no longer occur upon GDDRMAIN
* startup if another GDDR instance was not shut down cleanly.
*
* In addition, the GDDRMAIN ESTAE routine has been improved to
* ensure that GDDRMAIN is shut down cleanly in case of an
* abend.
*
* MODULES: GDDRMAIN
* GDDRMCMD
*
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3499
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: New PRIMARY command to display primary
* C-system name
*
* DESCRIPTION DETAIL:
*
* A new command is needed to display the primary C-system name
* from any system in the GDDR-plex, including managed systems.
*
* PROBLEM RESOLUTION:
*
* A new PRIMARY command has been created to display the
* primary C-system name from the point-of-view of one or more
* C-systems. By default, the point-of-view from all C-systems
* is shown. The SYSTEM parameter may be used to narrow the
* scope to the specified C-system, and the SITE parameter may
* be used to narrow the scope to the C-system at the specified
* site. This command may be issued from any system where
* GDDRMAIN is active, including managed systems. It can be
* issued as a GDDRMAIN modify command (e.g., F GDDRMAIN,PRI),
* as a Perform Health Check panel primary command (e.g., PRI),
* or using the GDDRMCMD batch interface (see GDDRMCMD in
* SAMPLIB).
*
* Syntax:
*
* PRImary
* [,SITE={DC1|DC2|DC3|DC4}]
* [,SYStem={<system_name>|LoCaL|ALL}]
* [,TiMeOut=<seconds>]
* [,CONsole[={Yes|No}]]
* [,SysMSG[={Yes|No}]]
* [,SysPRinT[={Yes|No}]]
* [,DeBuG[={Yes|No}]]
*
* Example:
*
* GDDUC04I Primary C-system as seen from the indicated
* site/system
* ---------------------------------------------------------
* Site System Value
* ---- -------- -----------------------------------------
* DC1 N247 N247
* DC2 X99 N247
* DC3 X98 N247
* ---------------------------------------------------------
*
* MODULES: GDDRMCMD
* GDDRMCON
*
* ------------------------------------------------------------
++PTF(GD60005) REWORK(2023012) .
++VER(Z038) FMID(GDDR600)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3463 GDDR-3465
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: ABENDS0E0-29 upon GDDRMAIN startup or
* ABENDS0E0-28 upon GDDRMAIN shutdown
*
* DESCRIPTION DETAIL:
*
* An S0E0-29 abend could occur upon GDDRMAIN startup in the
* HBM (heartbeat monitor) subtask at GDDREVMI offset 0005AF74
* (data at PSW 183158F0 0010D507 3000F154). This causes the
* HBM subtask to terminate and leaves GDDRMAIN without
* heartbeat monitoring capabilities.
*
* In addition, an S0E0-28 abend could occur in GDDRRPT upon
* GDDRMAIN shutdown at GDDRMAIN offset 0006EAB2 (data at PSW
* D24FD37A 1000D207 D37D5004).
*
* PROBLEM RESOLUTION:
*
* An S0E0 abend should no longer occur upon GDDRMAIN startup
* in GDDREVMI or upon GDDRMAIN shutdown in GDDRRPT.
*
* MODULES: GDDREVMI
* GDDRRPT
Affected Products
Geographically Dispersed Disaster Restart (GDDR)Article Properties
Article Number: 000203766
Article Type: Solution
Last Modified: 07 Aug 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.