GDDR: Upgrade auf z/OS 2.5 führt zu Abstürzen und GDDR-Steuersystemen zur Ausführung im heruntergestuften Modus
Summary: Das Upgrade auf z/OS 2.5 führt zu Abstürzen in GDDR (Geographically Dispersed Disaster Restart) und GDDR Control SYSTEMS (C-SYS) wird im heruntergestuften Modus ausgeführt.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Die Mainframebetriebssoftware wird auf die Softwareebene z/OS 2.5 mit Wartungstoleranz aktualisiert. z/OS 2.5 wird für eine neue IBM z16-CPU verwendet.
GDDR GDDRMAIN wurde mit mehreren ABENDs gestartet, nachdem die z/OS-Wartung angewendet wurde:
- HBM meldet den folgenden Fehler beim GDDRMAIN-Start, GDDR-Host befindet sich im heruntergestuften Modus:
ABEND S0E0-29
- GDDRRPT meldet den folgenden Fehler beim Herunterfahren von GDDRMAIN:
ABEND S0E0-28
Die folgende Fehlermeldung wird in der Ausgabe des GDDR-Ereignismonitors (EVM) und des Heartbeat Monitor (HBM) angezeigt:
GDDUG86E No matching GDDR systems found
Wenn die ABEND S0E0-28 tritt beim Herunterfahren von GDDRMAIN auf, dann wird ein Abend S067-04 kann auftreten, wenn GDDRMAIN wieder aufgerufen wird.
Cause
Ein
Darüber hinaus wird ein
ABEND S0E0-29 kann beim Start von GDDRMAIN im HBM-Untertask beim Modul GDDREVMI, Offset 0005AF74, auftreten.
PSW 183158F0 0010D507 3000F154Dies führt dazu, dass der HBM-Untertask beendet wird und GDDRMAIN ohne Heartbeat-Überwachungsfunktionen bleibt. Der GDDR-Host wird im heruntergestuften Modus ausgeführt. GDDREVMI wird aktualisiert, um REGISTER AR15 zu löschen, bevor das Register verwendet wird, um eine
ABEND S0E0-29aus.
Darüber hinaus wird ein
ABEND S0E0-28 kann in GDDRRPT nach dem Herunterfahren von GDDRMAIN bei GDDRMAIN, Offset 0006EAB2, auftreten.
PSW D24FD37A 1000D207 D37D5004GDDRRPT wird aktualisiert, um REGISTER AR1 zu löschen, um eine
ABEND S0E0-28. GDDRMAIN wird aktualisiert, um zu überprüfen, ob das ALET-Token (Access List Entry Token) für Datenspeicherplatz 2 gültig ist. Diese Aktion wird durchgeführt, bevor auf den Datenbereich für eine andere GDDR-Instanz zugegriffen wird. Diese Aktion trägt dazu bei, eine Abend S067-04 beim GDDRMAIN-Start, weil eine andere GDDR-Instanz nicht ordnungsgemäß heruntergefahren wird.Resolution
Problemumgehung:
- Keine für ABEND S0E0-29, aber die GDDR-Hosts werden weiterhin im heruntergestuften Modus ausgeführt.
- Ein IPL (Initial Program Load) der logischen Partition (LPAR) ist erforderlich, um den Speicher zu löschen, wenn ein
Abend S067-04Tritt.
Dauerhafte Lösung:
- Für GDDR 6.0 stehen GD60004 und GD60005 Program Temporary Fix (PTF) zum Download beim Dell Support zur Verfügung.
- Bei GDDR 6.1 wurde das Problem im Basisprodukt behoben. Sie kann sie vom Dell Support herunterladen.
Additional Information
Beschreibung des Program Temporary Fix (PTF):
++PTF(GD60004) REWORK(2022315) .
++VER(Z038) FMID(GDDR600)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3459
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: Warning message GDDUG24W results in
* RC 8 on pre-script and post-script
* configuration displays
*
* DESCRIPTION DETAIL:
*
* During GDDR scripts, warning message GDDUG24W could result
* in an RC 8 on the pre-script and post-script configuration
* displays, for example:
*
* GDDUG24W 2 external RDF groups indicate SRDF/A active
* GDDR639I GDDR Completed pre-script configuration display
* with rc 8
*
* This is simply a messaging issue, as a non-zero RC on the
* configuration displays does not affect the outcome of the
* script.
*
* PROBLEM RESOLUTION:
*
* Warning message GDDUG24W will now result in an RC 4 on the
* configuration displays, as expected.
*
* MODULES: GDDRMCMD
*
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3460 GDDR-3472
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: ABENDS067-04 upon GDDRMAIN startup due
* to another GDDR instance not shutting
* down cleanly
*
* DESCRIPTION DETAIL:
*
* An S067-04 abend could occur upon GDDRMAIN startup at
* GDDRMAIN offset 000006AC (data at PSW 4038B219 02009540
* 50E8B219) if another GDDR instance was not shut down
* cleanly. This causes GDDRMAIN to terminate.
*
* PROBLEM RESOLUTION:
*
* An S067-04 abend should no longer occur upon GDDRMAIN
* startup if another GDDR instance was not shut down cleanly.
*
* In addition, the GDDRMAIN ESTAE routine has been improved to
* ensure that GDDRMAIN is shut down cleanly in case of an
* abend.
*
* MODULES: GDDRMAIN
* GDDRMCMD
*
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3499
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: New PRIMARY command to display primary
* C-system name
*
* DESCRIPTION DETAIL:
*
* A new command is needed to display the primary C-system name
* from any system in the GDDR-plex, including managed systems.
*
* PROBLEM RESOLUTION:
*
* A new PRIMARY command has been created to display the
* primary C-system name from the point-of-view of one or more
* C-systems. By default, the point-of-view from all C-systems
* is shown. The SYSTEM parameter may be used to narrow the
* scope to the specified C-system, and the SITE parameter may
* be used to narrow the scope to the C-system at the specified
* site. This command may be issued from any system where
* GDDRMAIN is active, including managed systems. It can be
* issued as a GDDRMAIN modify command (e.g., F GDDRMAIN,PRI),
* as a Perform Health Check panel primary command (e.g., PRI),
* or using the GDDRMCMD batch interface (see GDDRMCMD in
* SAMPLIB).
*
* Syntax:
*
* PRImary
* [,SITE={DC1|DC2|DC3|DC4}]
* [,SYStem={<system_name>|LoCaL|ALL}]
* [,TiMeOut=<seconds>]
* [,CONsole[={Yes|No}]]
* [,SysMSG[={Yes|No}]]
* [,SysPRinT[={Yes|No}]]
* [,DeBuG[={Yes|No}]]
*
* Example:
*
* GDDUC04I Primary C-system as seen from the indicated
* site/system
* ---------------------------------------------------------
* Site System Value
* ---- -------- -----------------------------------------
* DC1 N247 N247
* DC2 X99 N247
* DC3 X98 N247
* ---------------------------------------------------------
*
* MODULES: GDDRMCMD
* GDDRMCON
*
* ------------------------------------------------------------
++PTF(GD60005) REWORK(2023012) .
++VER(Z038) FMID(GDDR600)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3463 GDDR-3465
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: ABENDS0E0-29 upon GDDRMAIN startup or
* ABENDS0E0-28 upon GDDRMAIN shutdown
*
* DESCRIPTION DETAIL:
*
* An S0E0-29 abend could occur upon GDDRMAIN startup in the
* HBM (heartbeat monitor) subtask at GDDREVMI offset 0005AF74
* (data at PSW 183158F0 0010D507 3000F154). This causes the
* HBM subtask to terminate and leaves GDDRMAIN without
* heartbeat monitoring capabilities.
*
* In addition, an S0E0-28 abend could occur in GDDRRPT upon
* GDDRMAIN shutdown at GDDRMAIN offset 0006EAB2 (data at PSW
* D24FD37A 1000D207 D37D5004).
*
* PROBLEM RESOLUTION:
*
* An S0E0 abend should no longer occur upon GDDRMAIN startup
* in GDDREVMI or upon GDDRMAIN shutdown in GDDRRPT.
*
* MODULES: GDDREVMI
* GDDRRPT
Affected Products
Geographically Dispersed Disaster Restart (GDDR)Article Properties
Article Number: 000203766
Article Type: Solution
Last Modified: 07 Aug 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.